answersLogoWhite

0

If the manufacturer specifies that a certain voltage is needed for their equipment, then that is the voltage that must be applied to it. To do otherwise may ruin the equipment and void the manufacturer's warranty.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Natural Sciences

How many volts needed to run a fluorescent light?

The voltage of your area is what determines the operating voltage of all equipment. Equipment from other countries usually has to use a transformer to get the correct voltage. The voltage on a fluorescent fixture is printed on the ballast of the fixture. See if the voltage on the ballast matches the supply voltage of the system that you are going to use to operate the fixture.


What is meant by a surge limiter?

A surge limiter (or surge suppressor) can be installed into your electrical panel to help protect your home from dangerous electrical spikes. It is usually installed in conjunction with a lighting arrestor. You can also buy single use surge protectors for sensitive appliances, such as computers, tv's, and stereo systems.


Can a 9 volt 1000 m a adapter replace a 9 volt 200 m a adapter- the polarity is the same-this is not bein used as a charger its being used to power a guitar effect pedal in place of 9volt battery?

Some 9 V adapters rated for 1000 mA will provide 9 V at 1000 mA. If you use it on a 200mA device the voltage may go up to 10-15 V and if that device can not handle the higher voltage, it it could burn out. Better adapters will only put out 9 V exactly and have no problem. Be careful of revere polarity where the positive on one is the negative pin for the other adapter.


Is it safe to always touch electrical equipment with dry hands?

While touching electrical equipment with dry hands reduces the risk of electric shock, it is not a guarantee of safety. Other factors, such as the condition of the equipment, the presence of moisture, and the voltage involved, can still pose risks. Always ensure that equipment is properly maintained, and avoid using it in wet environments to minimize hazards. Using insulated tools and following safety guidelines is also essential for safe handling.


How do you make an artificial lightning?

Creating artificial lightning typically involves generating a high-voltage electrical discharge in a controlled environment. This can be achieved through devices like Tesla coils or other high-voltage generators that can produce electrical arcs resembling lightning. Additionally, using specialized equipment and safety measures is crucial to prevent potential hazards associated with high-voltage discharges.

Related Questions

What other phone charger can i use for my daxian x9600 phone?

Try a universal charger. They usually come with various adapters for use with different equipment. Just make sure you set the voltage correctly,


What are the different types of power adapters available for electronic devices?

There are three main types of power adapters for electronic devices: AC adapters, DC adapters, and universal adapters. AC adapters convert alternating current from a wall outlet to the direct current needed by the device. DC adapters provide direct current power from a battery or other DC power source. Universal adapters can switch between different voltage and plug types to work with a variety of devices worldwide.


What determines the voltage in a generator?

in generator the flux will determines the voltage. the flux will improve by auto voltage controller or any other equipment.


How many volts needed to run a fluorescent light?

The voltage of your area is what determines the operating voltage of all equipment. Equipment from other countries usually has to use a transformer to get the correct voltage. The voltage on a fluorescent fixture is printed on the ballast of the fixture. See if the voltage on the ballast matches the supply voltage of the system that you are going to use to operate the fixture.


How do you determine if a breaker switch is bad?

You replace the breaker to see if that fixes the problem. There simply is no other practical approach. There exists testing equipment that will do this but it is much too expensive for general use.


What other types of equipment would you like to replace?

ipod cell phone


Can a 5V motor act as a helicopter?

A motor is a motor no matter what the voltage is. The only thing it acts as is a driving force for other equipment.


What other suzuki motors can you use to replace a samurai motor?

you can also use a 1.6 with the adapters from calmini susuky swiff motor but you have to modify the firewall a bit as the distributer cap touches it


What is Automatic stabilizer?

Automatic voltage stabilizer is a electronic device which has transformer and other control circuit for controlling output ac voltage. it controls automatically the output voltage to a certain voltage defined by designer and does not require manual changing when voltage go up or down. it is used in refrigerator and also on home equipment for safety purpose.


What are the different types of adapters available for electronic devices?

There are several types of adapters available for electronic devices, including USB, HDMI, VGA, Ethernet, and power adapters. These adapters allow different devices to connect and communicate with each other, enabling them to work together effectively.


Where could one purchase Powerline Network Adapters?

One can purchase Powerline Network Adapters on Amazon, Best Buy and Pc Advisor. Other places to purchase a Powerline Network Adapters are Staples and Ebay.


What are some good brands for Micro SD adapters?

There are plenty of good brands for Micro SD adapters. However, most of people are using Micro SD adapters of Kingston, Kingmax and some other brands.