answersLogoWhite

0

WHAT PARTS SHOULD THE DEVICE HAVE WHERE THE USER MUST PRESS OR TURN SOMETHING BY HAND

User Avatar

Lihle Mandela

Lvl 2
2y ago

What else can I help you with?

Continue Learning about Natural Sciences

How to reset circuit breaker in 1989 toyota supra?

To reset the circuit breaker on a 1989 Toyota Supra, locate the circuit breaker panel under the dashboard on the driver's side. Look for a small rectangular box with a reset button on it. Press the reset button to reset the circuit breaker. If the breaker keeps tripping, you may have an underlying electrical issue that needs to be addressed by a professional.


How do you test afci breaker?

To test an AFCI (Arc Fault Circuit Interrupter) breaker, first ensure the circuit is powered and then press the "Test" button on the breaker. The breaker should trip, indicating that it is functioning correctly. Afterward, reset the breaker by flipping it back to the "On" position. For complete testing, use a multimeter to check for proper voltage and continuity in the circuit, ensuring all devices are off during the test.


What should you do if a circuit breaker feels spongy and won't reset?

Some breakers must be turned all the way to the OFF position after they have tripped.Before you spend a lot of money, just flip the breaker all the way to the off position THEN try to turn it back on.Other answersIf this circuit breaker is a GFCI or RCD and it won't reset when you press its RESET button, it is doing its job.It is telling you there is something wrong in the circuit it is protecting.It may be a fault within an appliance (or its flexible cord or its plug) that is plugged into a socket outlet on the circuit being protected by the circuit breaker.To find out, disconnect all appliances on the circuit and then press the RESET button. If the breaker no longer feels spongy then you know if is not a fault in the circuit wiring.Then press the TEST button on the breaker. If it immediately trips then you know that the breaker itself is not faulty.Then press the RESET button again and re-connect one appliance at a time until you find the one that causes the breaker to trip off. That is the appliance (or its flexible cord or plug) which has a fault that is causing the breaker to trip. The fault will have to be repaired - or the appliance will need to be replaced - before the circuit breaker can be reset with that item connected to the circuit.Sometimes a fault can develop inside a socket outlet and there is now a "Neutral-to-Ground" short, or even a "Live-to-Ground" short, in the wiring to the outlet. Usually such shorts occur in the wall box behind the outlet because the wiring was done carelessly. Such a fault will also prevent a GFCI or RCD from being reset. That kind of fault must be fixed before the circuit breaker can be reset.If it is a regular circuit breaker it might be that the breaker is mechanically defective.For more information click on the links to the Related Questions shown below.As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.


How do you reset a circuit breaker on a shop vac?

To reset a circuit breaker on a shop vac, first unplug the machine. Locate the circuit breaker on the power cord or the vacuum itself and press the reset button. If the breaker doesn't reset, check for any obstructions or issues with the vacuum that may be causing the problem.


The tip of a flashlight bulb is touching the top of a 3V battery. Does the bulb light?

No, the bulb will not light up because there needs to be a complete circuit for the electricity to flow through. When you press the switch of the flashlight, it completes the circuit, allowing the bulb to light up.

Related Questions

How do you transfer music from limewire to flash drive?

well u press the start menu then u press Ur name (admin or something like that)it should come up with saved press on that and it should say lime wire press on that then open your usb key then drag from the saved > lime-wire to the usb key and it should start copying to the usb key.this should now be copid on to your usb key


Why should you never press a red button?

it usualy blows something up


How do you become a fan of something on Facebook?

simply press become a fan below it. and if its not there then just click it & it should take you to the page.


Why should you clamp or hold down parts before using the drill press?

You should clamp work on a drill press to ensure the drill bit goes exactly where you want it to. -Also, thin materials can often grip the drill bit and spin around if not clamped.


Is pressed a noun?

Yes, the word 'press' is both a noun (press, presses) and a verb (press, presses, pressing, pressed).Examples:A garlic press is very effective for dispersing the flavor. (noun)You should press him for an explanation. (verb)


Does the Samsung f480 have internet acsess?

yes it does. Go on the main menu page. then press applications. then scroll down, then press 02. Then scroll down to the one that says 'get settings'. then you will get some texts saying something about MMS's and stuff. then after that you should get one saying 'WAP' or something like that. At the bottom where it says back and menu and stuff it should say 'install' in the middle. press install and then go on the main menu and press the round circle that says browser under it on the left. then press enter URL, then type in the website you want to go on, and then it should work! :) Hope i helped!


Which button do you press to kill Makarov in Call of Duty Modern Warefare 3?

It should tell you Its something like Square probably


Where should I go to press charges?

You should go to the police station to press charges.


What is a Push to break switch?

A push-to-break switch is a type of momentary switch that is normally closed (conducting) and opens (breaks the circuit) when pressed. It is commonly used in situations where you want something to turn off when the button is pushed.


How can you immigrate on Animal Crossing?

You go to the town hall then go to the left window press immigration press yes get another DS then ready the game card click other then immigration or something like that and you should be done.


How do you enable xbox split screen Minecraft?

Just make sure that you have enough controllers and then when your in a game you will see something on the screen and it should say PRESS START TO JOIN. All you do then is do what it says. (PRESS THE START BUTTON TO JOIN)


Where is the WPS button on the PS Vita?

WPS is not something on PSVita, it is something on some routers. If the PSVita asks you to press it, it means to press it on your router, if it has one.