Water is a liquid at this pressure and temperature.
The surface temperature of Saturn at 1 bar is 134 Kelvin which equates to -139o Celsius
The temperature of the metal bar decreases.The temperature of the cool water increases.The final temperature of the metal bar will be the same as the final temperature of the water.
When a juice bar melts, it changes from solid to liquid state, but the matter remains the same. The new form is still considered part of the liquid phase, with the same chemical composition as the solid juice bar.
500 mm water column is equivalent to approximately 0.05 bar pressure.
The concept and measurement of the melting point of water can be attributed to various scientists throughout history, including Joseph Black, Joseph Louis Gay-Lussac, and others who contributed to the understanding of phase transitions in water.
Pressure at a given depth of water can be calculated using a formula like, "#1 #1kgf/cm2." Therefore, water pressure at 2000 meters below sea level will be around 1.2 bar.
5-6x150 Cu. BUS BAR PER PHASE
400 ounces
$400
400 or so
50-400 usd
The surface temperature of Saturn at 1 bar is 134 Kelvin which equates to -139o Celsius
voltage of incoming machine should be same as that of bus bar voltage
BAR is 60ft head of water
You just Calculate Size of Bus bar which has been mentioned below:Example: Calculate Size of Bus bar having Following DetailsBus bar Current Details:Rated Voltage = 415V,50Hz ,Desire Maximum Current Rating of Bus bar =630Amp.Fault Current (Isc)= 50KA ,Fault Duration (t) =1sec.Bus bar Temperature details:Operating Temperature of Bus bar (θ)=85°C.Final Temperature of Bus bar during Fault(θ1)=185°C.Temperature rise of Bus Bar Bar during Fault (θt=θ1-θ)=100°C.Ambient Temperature (θn) =50°C.Maximum Bus Bar Temperature Rise=55°C.Enclosure Details:Installation of Panel= Indoors (well Ventilated)Altitude of Panel Installation on Site= 2000 MeterPanel Length= 1200 mm ,Panel width= 600 mm, Panel Height= 2400 mmBus bar Details:Bus bar Material= CopperBus bar Strip Arrangements= VerticalCurrent Density of Bus Bar Material=1.6Temperature Co efficient of Material Resistance at 20°c(α20)= 0.00403Material Constant(K)= 1.166Bus bar Material Permissible Strength=1200 kg/cm2Bus bar Insulating Material= BareBus bar Position= Edge-mounted barsBus bar Installation Media= Non-ventilated ductingBus bar Artificial Ventilation Scheme= without artificial ventilationBus bar Size Details:Bus bar Width(e)= 75 mmBus bar Thickness(s)= 10 mmNumber of Bus Bar per Phase(n)= 2 NoBus bar Length per Phase(a)= 500 mmDistance between Two Bus Strip per Phase(e)= 75 mmBus bar Phase Spacing (p)= 400 mmTotal No of Circuit= 3 No.Bus bar Support Insulator Detail:Distance between insulators on Same Phase(l)= 500 mmInsulator Height (H)= 100 mmDistance from the head of the insulator to the bus bar center of gravity (h)= 5 mmPermissible Strength of Insulator (F')=1000 Kg/cm2
No, a bar of gold (like the ones at Fort Knox) weights roughly 400 troy ounces, or about 27.5 pounds.
It takes approximately 400 cocoa beans to make a 1 pound chocolate bar.