0
What else can I help you with?
Explain why the phase water goes through when heat is gained?
When heat is gained, water undergoes a phase change from a solid (ice) to a liquid (water) at 0°C, and then from a liquid to a gas (water vapor) at 100°C. This process involves absorbing energy to overcome intermolecular forces holding the molecules together in a particular phase.
What phase is the wAter at 50 c?
At 50°C, water is in a liquid phase under standard atmospheric pressure. It remains a liquid until it reaches its boiling point, which is 100°C at sea level. If the pressure were to change significantly, the phase could vary; for example, at lower pressures, it could boil at lower temperatures. However, under typical conditions, water at 50°C is clearly in the liquid state.
What happens to the phase boundary of water at 1 ATM?
At 1 ATM (atmospheric pressure), the phase boundary of water, which includes the lines separating solid, liquid, and gas phases in a phase diagram, indicates the conditions under which water can exist in different states. The melting point of ice (0°C) and the boiling point of liquid water (100°C) occur at this pressure. As temperature increases above 0°C, ice melts into liquid water, and as temperature rises above 100°C, liquid water vaporizes into steam. The phase boundary shifts under different pressures, affecting these transition points.
What temperature in the solid phase has the greatest water density?
In the liquid phase, it is 4o C. seeing how water only expands as it becomes ice, i think 0 degrees celcius is the densest
What phase is water in at 1atm pressure and -5c?
At 1 atm pressure and -5°C, water is in the solid phase, commonly known as ice. This temperature is below the freezing point of water (0°C at 1 atm), leading to the formation of solid ice. Therefore, at these conditions, water would not exist as a liquid.
How does temperature affect all three phases of water?
tempurature changes irs phase fromsolid to liquid or liquid so gas or the other way around
What phase is water in at 1 ATM pressure and 150oc?
Gaseous. If that is 150 degrees C, that would be steam.
What has more thermal energy one gram of water at 75 degrees or 100 grams of water at 75 degrees?
(75'C)x(1g) < (75'C)x(100g) .'. The second option has more thermal energy.
According to the phase diagram for H2O, what happen to the phase of water at 0.5 atm pressure as the temperature is decreased from 110 C to -10 C?
Water changes from gas to liquid to a solid
What determines the phase in which water exists by?
The phase of water (solid, liquid, gas) is determined by its temperature and pressure. At normal atmospheric pressure, water is a liquid at temperatures between 0°C and 100°C. Changes in temperature and pressure can cause water to change phases.
Explain why the phase water goes through when heat is gained?
When heat is gained, water undergoes a phase change from a solid (ice) to a liquid (water) at 0°C, and then from a liquid to a gas (water vapor) at 100°C. This process involves absorbing energy to overcome intermolecular forces holding the molecules together in a particular phase.
What grade is 150 out of 200 points?
if you get a 150 out of 200 then you will a 75% which is a C average
How many amps load taken to 75 hp motor?
The answer is that it depends upon the a. efficiency (to determine its input power). b. supply voltage. c. nature of the supply (single-phase, three-phase, d.c., etc.)
What phase is the wAter at 50 c?
At 50°C, water is in a liquid phase under standard atmospheric pressure. It remains a liquid until it reaches its boiling point, which is 100°C at sea level. If the pressure were to change significantly, the phase could vary; for example, at lower pressures, it could boil at lower temperatures. However, under typical conditions, water at 50°C is clearly in the liquid state.
Degree of freedom of ethanol -water at azeotrope?
phase rule F=C+2-p c= no. of components p=no. of phase here 2 represents temp and press are constant C=2 [water,ethanol] P=2[liq,vap] so,F=2
What temperature in the solid phase has the greatest water density?
In the liquid phase, it is 4o C. seeing how water only expands as it becomes ice, i think 0 degrees celcius is the densest
What is the solution for -15 plus c plus 5 equals 75?
-15+c+5 = 75 c = 75+15-5 c = 85
