The entire world
Only by being put in the furnace at a power plant, then it would help to light a whole region.
No, a light bulb will not light up if electricity does not reach it. Electricity is required to flow through the filament in the bulb to generate light. If there is no electrical current, the bulb will not illuminate.
It shouldn't, but if the bulb is being used to heat the lizard's terrarium it won't provide enough heat and the lizard may be lethargic. Use a proper terrarium heating lamp, not a CFL or LED bulb for that purpose.
The wavelength of light emitted by a 25 watt incandescent light bulb corresponds to the visible spectrum, ranging from about 400 to 700 nanometers. It primarily emits infrared radiation, with some visible light. The specific wavelength depends on the bulb's temperature and materials used.
No, oranges cannot light a light bulb because they do not produce enough electricity or energy to generate light in a light bulb. Oranges do not have the capacity to function as a power source for a light bulb.
the second bulb become weak because there's not a lot of energy being transformed into bulb 2
Yes, a motor can be affected if a light bulb burns out, depending on the circuit design. In a series circuit, if the light bulb is the only load, the circuit will open and the motor will stop functioning. However, in a parallel circuit, the motor will continue to operate because it is not dependent on the light bulb for power. Overall, the impact on the motor depends on how the devices are wired together.
The energy efficient light bulb costs several times as much as the normal (incandescent) light bulb. The exact prices may vary from region to region. In any case, the extra cost will be more than compensated by savings in electrical energy, over the lifetime of the bulb.
Only by being put in the furnace at a power plant, then it would help to light a whole region.
Thomas Edison is best-known for the light bulb.
2005 Chevrolet Cobalt Light Bulb Replacement GuideHigh & Low Beam Headlamp Light Bulb Size:9007LLParking Light Bulb Size:3157LLFront Turn Signal Light Bulb Size:3157LLRear Turn Signal Light Bulb Size:3057LLTail Light Bulb Size:3057LLStop Light Bulb Size:3057LLHigh Mount Stop Light Bulb Size:912Fog/Driving Light Bulb Size:H11-55WLicense Plate Light Bulb Size:194Back Up Light Bulb Size:921Front Sidemarker Light Bulb Size:194Rear Sidemarker Light Bulb Size:194Map Light Bulb Size:2825LLDome Light Bulb Size:562Step/Courtesy Light Bulb Size:212-2
The type of light bulb that is compatible with a blue refrigerator light bulb is typically an LED bulb.
A light bulb
To build the light bulb.
Loosed ground, short on wire, faulty light bulb. Most likely cause, if all the lights are affected, is a faulty light switch.
The electric light bulb came first but was patented later that the telephone was.
To safely change a light bulb using a light bulb stick, follow these steps: Turn off the power to the light fixture. Use a stable ladder to reach the light bulb. Attach the light bulb stick to the bulb securely. Unscrew the old bulb and carefully remove it. Insert the new bulb and screw it in place. Remove the light bulb stick and turn the power back on.