blue because it enhance the resolving power.
I think you should see a phsycololgist.
A compound light microscope is typically used to observe amoebas due to their small size. This type of microscope allows for higher magnification and resolution, making it easier to study the intricate details of amoebas.
Ashless filter paper is recommended when analyzing samples that are sensitive to any ash residue left by the filter paper after filtration. Using ashless filter paper helps minimize the risk of contaminating your sample with ash particles, ensuring accurate and reliable results in your analysis.
With higher magnification you can observe bigger.To see clearly resolution also should be high.
You should not use a bulb above 100watts.
An adjustable condenser in a microscope should be set at the highest position for maximum resolution. This position allows for maximum illumination and better focus of the specimen, resulting in sharper and more detailed images.
All images that will be used on the computer only should have a resolution of 72, for websites,etc.
New and Year should be capitalized but resolution should not.
As far as the running of the tank and the efficiency of the filter is concerned, it doesn't matter if the water splashes down into the tank or flows quietly into it provided you are getting a maximum flow and the filter is cycled.
The cabin air filter on a 2001 Pontiac Grand Am is located just below the glove compartment. It should be replaced every 30,000 miles for maximum effectiveness.
If space is not an issue, store them at full resolution. That way if you want to go back and edit, crop, etc. you will have maximum file size and get the best results.
The oil capacity of a 1990 VW Cabriolet is 5 quarts when the filter is changed. The oil and filter should be changed every 3,000 miles or 3 months for maximum longevity.
To get the sharpest, clearest picture on your computer monitor, you should look for a high maximum resolution. Also be sure to use DVI cables.
The fuel filter on a 2003 Mazdaspeed Protege is located along the vehicle's frame, just past the fuel tank. It should be replaced every 30,000 miles for maximum performance.
speed
A transmission fluid change is recommended every 100,000 miles on a Dodge Neon. The filter should also be replaced at this time for maximum longevity.
It should be the rms value of your supply.