answersLogoWhite

0

Disconnect the circuit breaker or fuse to that outlet. Then disable or replace the outlet. This is fairly easy and you can buy a new outlet at a home improvement store for a couple of bucks. If you are not comfortable working with these sorts of things call an electrician.

User Avatar

Wiki User

19y ago

What else can I help you with?

Continue Learning about Natural Sciences

When the test button is pressed on a gfci outlet it sparks and trips two breakers in the main panel What could be the problem?

The test button should only trip the GFCI. The fact that it is tripping two breakers indicates that somehow both breakers are feeding your GFCI circuit. I have seen this when there was a wiring error and two circuits were joined in an outlet that was connected to a breaker and through the GFCI outlet. To troubleshoot determine which outlets are effected when both breakers are off. Pull outlet from box and if there are two feeds remove one from outlet and run a toner on wire left on outlet to panel and one off outlet to panel. The GFCI could block the toner so if one side of the outlet does not tone back to panel check at GFCI. There must be two paths to your electric panel for the two breakers to trip and the GFCI may be faulty as well. Another way to check is to have the GFCI reset and both breakers on. Check each outlet that you have identified as being on GFCI noting that they can be in different rooms. With all outlets working turn off one of the tripped breakers. See if any outlets so off. If not turn off the other breaker and turn on the first breaker. If power is still present then the outlets are being fed by both breakers.


How far can sparks travel?

Sparks can travel varying distances depending on factors like their size, intensity, and environmental conditions. Generally, small sparks can travel a few feet, while larger sparks, such as those produced by welding or grinding, can travel up to 20 feet or more. Wind and surface conditions can also influence how far sparks can travel. Safety measures are essential in areas where sparks are generated to prevent fires.


Do sparks need oxygen?

Sparks are rapid oxidation. Oxygen is required for oxidation to take place.


How might a fire start in an earthquake?

A fire during an earthquake can start when gas lines rupture, leading to leaks that may ignite from sparks or flames from damaged electrical equipment. Additionally, falling debris can break electrical wires, creating sparks that can also ignite nearby flammable materials. The chaos of the earthquake can hinder response efforts, allowing fires to spread rapidly. Finally, the shaking may cause accidents with open flames, such as candles or stoves, further increasing the risk.


Where nitroglycerin must be store?

Nitroglycerin should be stored in a cool, dry place away from heat and sunlight. It should be kept in its original packaging and away from sources of ignition or sparks due to its high flammability. Additionally, it should be stored securely out of reach of children and pets.

Related Questions

Is it dangerous when an outlet sparks when plugging something in?

Yes, it can be dangerous when an outlet sparks while plugging something in. Sparking may indicate a loose connection, damaged wiring, or an overloaded circuit, all of which can pose fire hazards. It's important to stop using the outlet immediately and have it inspected by a qualified electrician to prevent potential electrical fires or further damage.


What are the most common causes of fire on a constrution site?

Sparks from welding slag and not having a fire extinguisher nearby.


Is it dangerous when an outlet sparks when removing plug?

Well it depends. An outlet will spark when you remove a plug if the machine is still on, so make sure you turn the thing off before you pull the plug out.


What safety precautions should be taken when dealing with car battery sparks?

When dealing with car battery sparks, it is important to wear protective gloves and eye goggles to prevent injury. Make sure to keep the area well-ventilated and avoid smoking or using open flames nearby. Additionally, always disconnect the negative terminal first when working with the battery to reduce the risk of sparks.


What type of glove should you wear to protect yourself from electrical sparks?

You should wear insulated gloves to protect yourself from electrical sparks.


Why is mobile phones switched off in fuel stations?

Mobile phones give off electrical sparks when they ring which can ignite the vapors from gasoline being pumped. You should also touch a metal part of your car when you get out to discharge the static electricity so you don't spark.


Why did Nicholas Sparks write a novel after his injury?

Nicholas Sparks wrote a novel after his injury as a way to cope with the physical and emotional challenges he was facing. Writing provided him with a creative outlet and allowed him to channel his thoughts and emotions into a positive and productive activity during his recovery process.


Does Jordin Sparks like Chris brown?

yeah Jordin Sparks did like Chris but we not shore if she still do but Chris should have had been went with jordin sparks and Rhianna should have had left Chris alone i don't see why he wanted her she cause all dis drama all I'm sayin is dat he should have picked Jordin Sparks instead of dat ova girl and plus Jordin Sparks looks better den Rhianna an i don't think she needs tah loose any weight she is good dah way she is!ps. I hate Rhiannarhianna iz cool i like her


Is Dear John adapted from a novel by nicholas sparks?

It's by Nicholas Sparks so yeah it should be . - :)


Can a short circuit cause a fire?

Yes, a short circuit can cause a fire by creating a surge of electrical current that generates heat and sparks, potentially igniting nearby flammable materials.


What are sparks?

what are sparks


How do you dry a wet electrical outlet?

While powerwashing, water ran down the cord into the outdoor electrical outlet. Sparks flew, and the fuse "blew" into the off position on the master panel. I tried using a blowdryer, and it worked temporarily, then the fuse blew again. I tried using a fan blowing directly into the outlet also, but that does not appear to help. Do I need to call an electrician, or will it naturally dry out over time?