answersLogoWhite

0

Some lights won't dim. If you've installed the switch properly, and are using traditional incandescent bulbs (not flourescent, LED, E-L lights or any other very low current light), the dimmer will dim the bulbs. Make sure you're using a dimmable bulb and that the dimmer is installed properly.

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Natural Sciences

Can a dimmer switch be added on any light?

Not all lights can be dimmed with a dimmer switch. Only lights that use dimmable bulbs or are compatible with dimmable fixtures can be controlled with a dimmer switch. It's important to check the manufacturer's specifications to ensure compatibility.


Is it cause for concern if one wall in a room by a light switch is always warm to the touch?

Be very careful. If the wires behind your light switch plate are hot enough to do that, you have a hazardous condition. Perhaps you should switch off your house's electricity for awhile and call someone to come out and have a look at it. I know that gets expensive, but you're very likely to have a fire with wiring like that


How is the light switch in the bathroom different to other light switches?

A light switch in the bathroom is typically designed to be more resistant to water and moisture compared to light switches in other areas of the house. This is to ensure safety in a potentially wet environment like the bathroom. Additionally, some bathroom light switches may have built-in features like a timer or a dimmer switch to provide additional functionality.


Can you put a dimmer switch rheostat on a halogen light fixture?

Halogen lamps that run at line voltage (regular house wiring - 120V AC) work the same as incandescent bulbs on dimmer switches. But, if the light fixture is running off a transformer, then it is important to find out if the transformer is dimmable, as some low-voltage fixtures cannot be dimmed. If dimable, 12-volt or 24-volt Halogen lighting fixtures require special dimmers (Low-Voltage Dimmers). There are two types of transformers for low-voltage lighting (Magnetic (MLV) or Electronic (ELV)). Magnetic transformer use copper, wound around a steel core which is inductive (magnetic field). Electronic transformer is an electronic circuitry which is capacitive (electric field). Before selecting a dimmer, determine what type of ballast is in the lighting fixture. Magnetic low-voltage dimmers are rated in volt-ampere (VA). The wattage rating is provided only as a reference and indicates the lamp wattage that can be used. Electronic low-voltage dimmers are rated in watts, which is also the lamp load connected to the transformer.


How to fit a dimmer switch which has an sw connection a l and an arrow with a wave line through it which do you connect these to if in your house you have a red wire black wire and earth?

For countries in Europe and other world areas running a 50 Hz supply service.The answer to your question is rather straightforward. The "Sw" connection is used for a "two-way switch" configuration. If you don't have another switch controlling the same light (as is usual on a staircase) then don't use this connection on the dimmer switch.The "arrow with a wave" is the "Switched Live" connection. This provides live power service to your light fitting.Since the dimmer switch doesn't require a connection to the "neutral" wire - nowadays a wire covered in blue-coloured pvc insulation - or, in old wiring, with black insulation - you must ensure that the circuit is completed by connecting the neutral wire from the incoming service to the neutral wire from your light fitting - nowadays a wire covered in blue-coloured pvc insulation - or, in old wiring, with black insulation . Ensure this is done correctly and safely using an insulated connector block.BEFORE YOU ATTEMPT TO DO THIS WORK, ALWAYS SWITCH OFF THE LIGHTING CIRCUIT AT THE CIRCUIT BREAKER BOX OR, ON OLDER WIRING SYSTEMS, THE MAIN FUSE BOX!1. For a 1-way installation: connect the live service wire - nowadays a brown insulated wire - or, in old wiring, a red wire - to the "L" (common) connection on the dimmer switch and the brown (or red) wire from the light fitting to the dimmer's "arrow with a wave" connection.2. Ensure that the neutral connection (as described above) is correctly made.3. Always connect the earth wire - nowadays a green/yellow wire - or just plain green in old wiring - to the brass earth terminal in the wall box, if there is one (but there may not be one in an old wiring system) and always be sure to connect any green/yellow (or plain green in old wiring) earth wire coming from the light fitting either into that earth terminal in the wall box or use a separate insulated connector block. Often the dimmer switch itself does not have any connection for an earth wire but, if it does, an insulated green/yellow earth wire should go to that as well.It's as simple as that! Happy DIY'ing........WarningBecause you needed to ask this question here, you do not have quite enough knowledge to be safe. Be aware that you are working with voltages that could injure or kill you if you don't know how to do this job safely!Trying to answer this question without personally seeing what you are trying to describe is a recipe for disaster. There are too many things that could be misinterpreted.As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.

Related Questions

I have a fan in my car and I'd like to control the speed with a rheostat switch. Is there such a gadget for a car that operates off a 12 volt car line?

Any light dimmer switch fomr in your house should work fine. The trouble would be how to mount it in the vehicle.


Can a dimmer switch be added on any light?

Not all lights can be dimmed with a dimmer switch. Only lights that use dimmable bulbs or are compatible with dimmable fixtures can be controlled with a dimmer switch. It's important to check the manufacturer's specifications to ensure compatibility.


How does one get a Bruno stairlift installed in the house?

Bruno stairlift can be installed in the house by yourself, but it is risky. You should get it installed professionally by sending a request on the Bruno website.


What is an example of Ohms Law?

The simplest example of Ohm's Law is an old fashioned dimmer switch in your house. As you turn the dimmer switch up, the light gradually brightens until it reaches full intensity. Conversely, you can turn the dimmer switch down, and the light gradually darkens.The dimmer switch is a variable resistor. That is, the electrical resistance of the dimmer switch changes as you rotate the knob. Ohm's Law tells us that the flow of current is directly proportional to the voltage, and inversely proportional to the resistance. Since the voltage across the switch doesn't change, the only thing that changes is the resistance when you turn the dimmer switch knob.As you turn the dimmer switch down, you are actually increasing the resistance of the dimmer switch. The current is inversely proportional to the resistance, so as the resistance goes up, the current (flow of electricity) goes down, and the light gets darker. This is an example of Ohm's Law.NOTE: This example applies to rheostat switches, and does not apply to modern current-clipping dimmer switches. Rheostat switches are seldom used now because they can overheat, but the illustration is still a useful example of Ohm's Law.


Why do some of house lights dim?

If it is a specified Dimmer light wich is made to dim is done by switch. But Normal lights dim because power else where is being used and the light dims to give the other aplliance the power.. Its nothing to worry about.. or your house is Haunted...


How should I prepare my house for new carpet installation?

I am getting new carpet installed, what should I do to prepare myself for new carpet installation? What should I do to have my house ready for new carpet installation?


How can I hook a generator to my house?

To hook a generator to your house, you will need a transfer switch installed by a professional electrician. This switch allows you to safely connect the generator to your home's electrical system, providing power during outages. Be sure to follow all safety guidelines and local regulations when setting up a generator for your house.


How can I fix dimming lights in my house?

To fix dimming lights in your house, you can try the following steps: Check the light bulb: Make sure the bulb is securely screwed in and not loose. Replace the bulb if it is old or damaged. Check the dimmer switch: If you have a dimmer switch, make sure it is functioning properly. Sometimes dimmer switches can wear out and need to be replaced. Check the electrical connections: Inspect the wiring connections in the light fixture and the electrical panel to ensure they are secure and not loose. Consider the voltage: If the dimming issue persists, it could be due to fluctuations in voltage. Contact a licensed electrician to assess and address any electrical issues in your home. By following these steps, you can troubleshoot and potentially fix the dimming lights in your house.


Is it cause for concern if one wall in a room by a light switch is always warm to the touch?

Be very careful. If the wires behind your light switch plate are hot enough to do that, you have a hazardous condition. Perhaps you should switch off your house's electricity for awhile and call someone to come out and have a look at it. I know that gets expensive, but you're very likely to have a fire with wiring like that


Can a Gas meter be installed a house and does it have to be installed in metal?

The meter has to be installed on the exterior using black steel pipe in the home.


What was in installed in the White House in 1897?

Plumbing


When was bathrooms installed in the white house?

It's were, not where.