answersLogoWhite

0

BS1361 fuses come in a standard size of 25mm in width and varying lengths depending on the current rating of the fuse. Common current ratings for BS1361 fuses are 5A, 15A, 20A, and 30A.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

When was Bay to Breakers created?

Bay to Breakers was created in 1912.


Will a 100 amp breaker box work if there are 5 220 amp breakers and 7 110 breakers?

It will if the 100 amp distribution board is a 20 circuit board. Ten spaces for the 240 volt breakers and seven spaces for the 120 volt breakers. There are two types of 100 amp breaker boards, one rated at 100 percent and the other at 80 percent. Depending on what rating on the panel board you are using will govern the maximum amount of current that can be legally drawn from the board. This breaker board rating will also govern the size of the main breaker installed and the wire size to feed the board, either 100 amp wire or 80 amp wire. The second consideration is what are the connected loads to the breakers, with the total of seventeen breakers, the board can only supply as much amperage as the main breaker will allow.


What breakers are compatible with ge breaker boxes?

GE circuit breakers with catalog numbers ranging from THQL1115 through to THQL1150 can be substituted like for like with Cutler-Hammer circuit breakers coded CL115 through to CL150, ITE Siemens circuit breakers coded Q115 through to Q150 and Square D circuit breakers coded HOM115 through to HOM150. These are single pole breakers. GE circuit breakers with catalog codes from THQL2115 through to THQL2150 can be substituted with Cutler-Hammer circuit breakers CL215 through to CL250, Square D circuit breakers HOM215 through to HOM250 and ITE Siemens circuit breakers Q215 through to Q250 of the same amperage and voltage. These are double pole breakers.


Electrician said that he would add 2 new circuits so that the breakers wouldn't trip. How do I know he actually did that if there wasn't any new circuit breakers installed in the panel?

He may have installed Tandem breakers. Tandem breakers allow you to fit 2 breakers into one standard breaker slot. They are slimmer in design to allow for this.


What breakers can be used in a Bryant breaker box?

Bryant breaker boxes typically use Bryant circuit breakers. It is important to use breakers specifically designed for the Bryant panel, as using incompatible breakers can cause safety hazards. Always consult the manufacturer's guidelines or an electrician for the appropriate breakers to use.

Related Questions

What size breakers for a hobart P660 mixer with 8.6amp pull and 3 phase?

The size-breakers for a Hobart P660 mixer with 8.6amp pull and 3 phase is the 23.43-inch size breakers.


When do spring breakers come out?

2013


Why are large transformers designed not to have optimum regulation in order for circuit breakers to be within reasonable size?

Transformer voltage regulation and size of the circuit breakers have no direct relation


Do pushmatic breakers come in gfci 20A?

yes


How do you get four twenty amp circuits from two twenty amp circuits?

Remove the two twenty amp breakers from the regular size slot and install two mini amp breakers. A mini amp breaker has two breakers per regular size slot.


Where can I find circuit breakers?

Lowes and Home Depot carry circuit breakers as well as the wiring and box. Circuit Breakers come in several watts, so be sure you get what is appropriate for your living space.


How many calories are in a jaw breaker?

Jaw breakers have 23 to70 calories, depending on the size


Where is the best place to buy plus sized wind breakers in Chicago Illinois?

A great place to buy plus size wind breakers is either H&M or the Gap. Both have online stores if the stores in Chicago don't carry the size you need.


Are Eaton breakers compatible with my electrical panel?

To determine if Eaton breakers are compatible with your electrical panel, you should check the manufacturer's specifications for your panel and compare them with the specifications of the Eaton breakers. It is important to ensure that the breakers are the correct type and size for your panel to avoid any safety hazards or malfunctions. If you are unsure, it is recommended to consult with a licensed electrician for assistance.


Are Siemens breakers compatible with my electrical panel?

Siemens breakers are compatible with Siemens electrical panels. It is important to ensure that the breaker is the correct type and size for your specific panel to ensure safe and proper functioning.


Are ge breakers interchangeable with challenger breakers?

Cooper breakers


Why do breakers trip and how can this be prevented?

Breakers trip when there is an overload of electrical current flowing through them, causing them to shut off to prevent overheating and potential fires. This can be prevented by avoiding overloading circuits, using the correct size breakers for the electrical load, and regularly checking and maintaining the electrical system.