To set the time zone on a Sharp SPC 502 clock, press and hold the "Time Set" button until the time zone indicator starts flashing. Press the "Time Zone" button to toggle through the available time zones until you find the correct one. Press the "Time Set" button again to confirm and exit the setting mode.
502 miles is equal to approximately 808.8 kilometers.
502\27=18.59mol 18.59*[6.022*10^23]
This is R-502 with a boiling point at -45 0C.
Green.
The country code and area code of Tidaholm, Sweden is 46, (0)502.
There is no area code 502 in Mexico, nor any numbers beginning with +52 50X. Country code +502 is Guatemala, but there are no numbers beginning with +502 9161. Area code +52 916 is for Palenque, Chiapas, Mexico, and nearby towns; local numbers are 7 digits, and may begin with '1'.
Area code 270 split from area code 502 on April 19, 1999, and became mandatory on November 1, 1999.
To set the time zone on a Sharp SPC 502 clock, press and hold the "Time Set" button until the time zone indicator starts flashing. Press the "Time Zone" button to toggle through the available time zones until you find the correct one. Press the "Time Set" button again to confirm and exit the setting mode.
The area codes in Kentucky are 270, 502, 606, and 859.
To set up a Sharp Atomic Clock Model SPC 502, first, insert the batteries and ensure they are properly seated. Next, place the clock in an area with good visibility to the signal and press the "Set" button to enter the time zone setting. After selecting your time zone, the clock will automatically search for the atomic time signal; ensure it remains in a location where it can receive the signal without interference. Finally, adjust any additional settings, such as alarm or display preferences, as needed.
Area = pi*502
Kentucky has five area codes:270: Bowling Green, Paducah, western KY364: (overlay of 270, serving the same communities)502: Louisville, Frankfort606: Ashland, rural eastern KY859: Lexington, Covington
Area = pi*502 in square mm
004, 502, 627
Area = pi*502 square cm
Trouble code P0502 means:Vehicle speed sensor circuit low input