A line graph would be suitable for recording the temperature of hot water in a pan over time. This type of graph can effectively show how the temperature changes at different time intervals.
No, the above thermometer cannot be used to record the temperature of boiling water. Most household thermometers have a limited temperature range that does not typically extend to the boiling point of water, which is 100 degrees Celsius (212 degrees Fahrenheit). To measure the temperature of boiling water, a thermometer with a higher temperature range is required.
It depends upon what you are using it for. I generally use room temperature water for cooking.
Place the container of water in a vacuum & it should start to boil at room temperature.
The plateau on the graph indicates that the water has reached its boiling point and is transitioning from liquid to gas phase. During this phase change, the temperature remains constant while the water absorbs heat to break intermolecular bonds and change its state.
The thermometer will show the temperature of the pure water being collected, which should be around the normal room temperature. If the water was heated or cooled prior to collection, the thermometer will reflect that temperature instead.
Line Graph
The phase change of water graph shows the relationship between temperature and state of water. It includes the three main phases of water: solid (ice), liquid (water), and gas (steam). The graph illustrates how water transitions between these phases with changes in temperature and pressure.
density
Boiling water would have a horizontal line graph if time was on the horizontal axis and temperature was on the vertical axis.Water will not change temperature as it changes state - from a liquid to a gas or from a solid to a water.Water can change temperature if it is solid or liquid or gas.
A graph with two flat sections joined by a slope represents a phase change. The flat sections indicate a constant temperature during a phase change, such as when ice is melting or water is boiling. The slope represents a temperature increase or decrease during the transition between phases. In a graph, you would mark the flat section for ice melting and boiling water where the temperature remains constant.
Not directly you cant, but sea temperature does decrease with depth, although its not a straight line graph ( though depth : pressure is.)
The plateau on the graph indicates that the water has reached its boiling point. During this phase, the temperature remains constant because the heat energy supplied is being used to convert the liquid water into water vapor, rather than increasing the temperature.
Yes, there are graphs showing the solubility of NaCl in water vs temperature and pressure. At room temperature and standard pressure, NaCl solubility is around 36 g per 100 ml water. As temperature increases, solubility also increases. Pressure has a smaller effect on NaCl solubility compared to temperature. A graph can illustrate these relationships visually.
room temperature
No, the above thermometer cannot be used to record the temperature of boiling water. Most household thermometers have a limited temperature range that does not typically extend to the boiling point of water, which is 100 degrees Celsius (212 degrees Fahrenheit). To measure the temperature of boiling water, a thermometer with a higher temperature range is required.
triethyl amine in water system,it was cool in ice bath,when it cooling temperature is decreases so misibility occurs so graph will come lower consolute temperature
Yes, there is a solubility graph for sodium acetate, which shows how its solubility changes with temperature. Sodium acetate is more soluble in hot water than in cold water, and its solubility increases as temperature rises.