0
What else can I help you with?
How thick is 8 inch by 12 inch ceramic?
The thickness of a standard ceramic tile is typically around 3/8 to 1/2 inch. However, the thickness can vary depending on the manufacturer and type of tile. To know the exact thickness of an 8 inch by 12 inch ceramic tile, you would need to check the specifications provided by the manufacturer.
How many sq feet of 12x24 tile do you need to cover a floor that is 8ftx8ft?
Each tile will cover 2 square feet. You have 64 square feet. You will need 32 tiles.
Can a magnet attract through ceramic tile?
Yes, a magnet can attract through a ceramic tile as long as the tile is not too thick or made of a ferromagnetic material that would interfere with the magnetic field. The strength of the attraction may be weaker compared to attracting directly without the tile in between.
How do you get the scuff marks off a sealed tile floor?
I have done this. There is a scuff mark remover at your hardware store in the tile section.AnswerI know that they are easily removed from linoleum by rubbing them with the sole of athletic shoes. Try that.
What happen when lemon juice falls on shahabad tiles?
If lemon juice falls on Shahabad tiles, it can cause etching on the surface of the tile due to its acidic nature. This can lead to discoloration or dulling of the tile surface. To prevent damage, it's best to clean up spills promptly and avoid acidic substances on Shahabad tiles.
Each floor tile is1 foot square the perimeter is feet?
The perimeter of each tile is four feet.
A rectangular tile floor has a width of 5 meters and a perimeter of 21 meters. Which of these is the length of the floor?
The length of the floor is 5.5 meters because 2*(5.5+5) = 21 meters which is the perimeter
What unit would you measure tiles for a floor?
In the US, square feet. In most other countries, I would presume, square meters.
What is the perimeter of a 1- inch square tile?
The perimeter would be 4 inches !
What is the perimeter of common floor tile for 12 inches?
48"Four sides of 12in each; 4x12=48.
Can you shellac over a tile floor?
no, you would have a messy lumpy floor
How can I replace floor tile?
To replace floor tile, you will need to remove the old tile, prepare the surface, apply adhesive, lay the new tile, and grout the joints. Make sure to measure and cut the tiles accurately and allow time for the adhesive and grout to dry before using the floor.
Can you tile over vct tile?
You would be putting a permanent floor over a temporary floor & that would not be wise. Might work but if it doesn't you lose it all...
How to measure the floor for tile installation?
To measure the floor for tile installation, start by calculating the square footage of the area to be tiled. Measure the length and width of the room and multiply these dimensions to get the total square footage. Make sure to account for any irregularities or obstacles in the space. This measurement will help you determine how much tile you need to purchase for the project.
What tile floor contractors have the best ratings in San Diego?
The best tile floor contractors in San Diego would be Francel Tile. They have excellent reviews and ratings online.
Bathroom Floor Tile?
form_title= Bathroom Floor Tile form_header= Install new bathroom tile in your home. What color tile would you like to install?*= _ [50] Do you need to remove old tile?*= () Yes () No Do you want to install under floor heating? *= () Yes () No What is the square footage of your bathroom?*= _ [50]
Why ceramic tile would pop up?
# The floor was unlevel before the tile was installed. # The thinset was to dry or did not cover the back of the tile 100% # The floor is settling # It was installed onto an improper subfloor
