answersLogoWhite

0

If it is an engineered set of electrical plans you need written permission from the engineer to change any materials on the specified plan.

If the plans are not engineered specific then you need to get authorisation from the customer to use different lighting fixtures.


No matter which way you go, the one thing that has to be adhered to is that the lighting fixtures must be CSA or UL approved devices. If the fixtures do not have these safety approvals you run the risk of the electrical project not getting an electrical approval for connection to an utility supply.


Remember there is a lot of Chinese counterfeit electrical equipment that is cheap to buy in the market place but it is not safe to use. Check with your insurance company on the subject if in doubt.

User Avatar

Wiki User

9y ago

What else can I help you with?

Continue Learning about Natural Sciences

What will be the effect if you were using different brands of outlets lighting fixtures instead of the specific plan in drawing?

Using different brands of outlet lighting fixtures instead of those specified in the plans may lead to compatibility issues, such as mismatched voltage or wattage requirements. This can result in poor performance, safety hazards, or even electrical failures. Additionally, varying aesthetics and construction quality might not align with the overall design intent, potentially compromising the visual coherence of the space. It’s essential to adhere to the specified brands to ensure safety, functionality, and design integrity.


What is the name of the drawing instrument which is used to copy maps in different scales?

A pantograph is a drawing instrument used to copy maps in different scales by tracing the original map on one end and replicating it at a different scale on the other end.


What does ns mean on a blueprint?

"NS" on a blueprint typically stands for "not specified" or "not shown." It is used to indicate that a specific detail or dimension is not provided on that particular drawing and may need to be clarified or determined through other means.


What is the Process of moving and instrument over a surface to leave a mark?

drawing


Does the density of a pure substance affect the drawing of the phase diagram?

No, the density of a pure substance does not affect the drawing of the phase diagram. Phase diagrams are typically determined by the temperature and pressure conditions at which different phases of a substance coexist, regardless of density.

Related Questions

What will be the effect if you were using different brands of outlets lighting fixtures instead of the specific plan in drawing?

Using different brands of outlet lighting fixtures instead of those specified in the plans may lead to compatibility issues, such as mismatched voltage or wattage requirements. This can result in poor performance, safety hazards, or even electrical failures. Additionally, varying aesthetics and construction quality might not align with the overall design intent, potentially compromising the visual coherence of the space. It’s essential to adhere to the specified brands to ensure safety, functionality, and design integrity.


What are the best light fixtures for high ceilings to ensure proper illumination and aesthetic appeal in a room?

For high ceilings, the best light fixtures are chandeliers, pendant lights, or track lighting. These fixtures provide both proper illumination and enhance the aesthetic appeal of the room by drawing the eye upward and filling the vertical space.


What is machine drawing?

Machine drawing may be defined as the representation of a machine component or machine by lines according to certain set rules. A machine drawing generally gives all the external and internal details of the machine component from which it can be manufactured. The machining symbols, tolerances, bill of material, etc. are specified on the drawing. The-relative position of the different components and to make assembly drawing are also specified. IS: 696-1972 is the BIS Code for Machine Drawing.


What has the author William B Warfel written?

William B. Warfel has written: 'The new handbook of stage lighting graphics' -- subject(s): Drawings, Electric lighting, Planning, Stage lighting 'Handbook of stage lighting graphics' -- subject(s): Drawing, Stage lighting


What are the different terms and objectives in drawing?

what are the different terms in the drawing and give ther meining


What does ref mean on a drawing?

Ref usually means that this dimension (and any associated tolerancing), is specified somewhere else, possibly on a lower level sub-assembly drawing.


What are the different types of drawing art?

The different types of drawing art include sketching, illustration, technical drawing, and fine art drawing. Each type has its own unique characteristics and purposes.


Is it bad that a drawing style is cartoony?

no everybody has a different style of drawing!!


What do you call a drawing that is full of colors?

a drawing full of different colors how do you call it


What are the names of different drawing styles?

Some names of different drawing styles include realism, abstract, impressionism, surrealism, and manga.


What are the different views in 3 Dimensional drawing?

There are a few ways that make drawing three dimensional objects easier and with different views. Drawing the top, front and side of an object with show different views.


What are the different types of eyes that can be included in a drawing?

The different types of eyes that can be included in a drawing are human eyes, animal eyes, and fantasy eyes.