If the gap is small then you may get 'arcing'. This is where the electricity will jump from one point to another (cable end to cable end). This could cause a fire. If the gap is too large for the electricity to jump then in effect there will be no-circuit.
Generally we use electric switches to put on or off the light,fan,computer,music system,etc.An electric switch is a device that is used to open or close an electric circuit.when we open an electric circuit the flow of electric current inthe circuit stops and when we close an electric circuit an electric current flows through it.
A Ground Fault Circuit Interrupter (GFCI) protects you from electric shock by quickly shutting off power to the circuit when it detects a ground fault or abnormal current flow. This can happen when there is a short circuit, a malfunctioning appliance, or contact with water.
Voltage causes current to flow in an electric circuit.
yes
No, an electric circuit does not have a beaker. A beaker is a container used for holding liquids, whereas an electric circuit consists of components like wires, batteries, resistors, and switches that allow electricity to flow in a specific path.
A switch basically represents a gap in the electric circuit. Electric current can pass through a circuit only if it is complete. An incomplete circuit can never pass a current through it. When the switch is in the 'off' position, the circuit has a break (gap) in it. When you put the switch in 'on' position, the circuit wire join and the circuit gets completed.
Generally we use electric switches to put on or off the light,fan,computer,music system,etc.An electric switch is a device that is used to open or close an electric circuit.when we open an electric circuit the flow of electric current inthe circuit stops and when we close an electric circuit an electric current flows through it.
Nope... if the circuit has a gap in it - the path of electrons is interrupted, and that would stop the circuit from working.
A Ground Fault Circuit Interrupter (GFCI) protects you from electric shock by quickly shutting off power to the circuit when it detects a ground fault or abnormal current flow. This can happen when there is a short circuit, a malfunctioning appliance, or contact with water.
If you are not talking literally about cutting a socket and are referring about the sockets circuit, then all that needs to happen is, a switch needs to be cut into the circuit.
I guess Electric Circuit....
The term is "circuit" (from the same root as circle) An electric circuit must be uninterrupted for the current to flow. (This is why circuit-breakers are also called circuit-interruptors.)
Voltage causes current to flow in an electric circuit.
the history of the electric circuit is that the person who made it his name is jack kilby but the history is that the electric circuit was one of the easiest way was to make the electric circuit when the electricity went out. THE END
Anything with a voltage power source, connecting wire and a load is an electric circuit. Hence if you have a flashlight you have an electric circuit.
When a circuit has a gap in it, everythig stops working because the electricity wont be able to flow around the whole circuit
Both open and closed circuits involve the flow of electric current. In an open circuit, the current is interrupted or stopped due to a gap in the circuit, while in a closed circuit, the current flows continuously through a complete loop of conductor.