At high pressure the gas become a liquid.
To calculate an increase, you can use the formula: increase = (new value - original value). To calculate a decrease, you can use the formula: decrease = (original value - new value). The percentage increase or decrease can be found by dividing the increase or decrease by the original value and multiplying by 100.
increase
Increase means to go up or get bigger in amount. Decrease means to go down or to get smaller in amount.
In a divergent nozzle, pressure will decrease as the flow area increases. This is due to the conservation of mass principle, where an increase in area causes a decrease in velocity and thus a decrease in pressure according to Bernoulli's equation.
oxygen
Because the higher you go, the less air there is above to push down and compress the air around you.
In general, increasing the diameter of a piston will only increase the volume of fluid the pump will move. Increasing the stroke, however, will increase pressure. The piston will rise higher in the cylinder to more fully compress the volume of fluid contained.
A cold compress is best immediately after the injury to decrease swelling and to increase vasoconstriction to the area to help keep bruising to a minimum. After a day or so, when the swelling has decreased, apply warm compresses to increase blod flow and eliminate the bruising quicker.
Yes. If you heat something up, its volume will usually increase, therefore its density will decrease. This is especially so in the case of gases; less for solids and liquids. Also, if you compress a gas, you will decrease its volume.
no. :)
The midpoint between decrease and increase is stability or equilibrium, where there is neither a decrease nor an increase occurring.
you increase or decrease mass by taking the mass out
When adjusting your cash flow statement, you increase (add) a decrease of inventory and decrease (subtract) an increase of inventory
< = decrease > = increase
they increase productivity but decrease jobs
Increase means to get more and decrease means to get less
Increase or decrease the circle's diameter