0
250 amps
What else can I help you with?
What would the approximate amperage setting be if a welder were set to the high range(150 to 350 amps). And the fine adjustment knob were pointing at 5 on a 10- point scale?
dawg we all on these same questions from the same textbooks that are grandparents would’ve thought were ancient
Can I Use portable 12v 1200amps charger for 375 A garden tractor battery?
Only if the voltage is the same (12v battery and 12v charge) and there is a lower amperage setting on the charger like around 10, maybe 30 but for small batteries 30 amps is a lot of current and they may get to be too hot warping plates, boiling acid away, and melting the case! 1200 amps... yeah, that's WAY too much. Don't use that setting!
What is the reason for setting 10.10 time on clock?
That tradition goes back to the beginning of clockmaking. By setting the hands of the clock to 10:10, the clockmaker makes the clock look symetrical (hour hand pointing up to the left and minute hand pointing up to the right) and offers the best view of the workmanship of the clock. Obviously, this only applies to analog clocks (the ones with hands), since a digital clock is not enhanced significantly by the time showing on the clock.
What is the scientific name for daylight saving time?
Daylight saving time is not specific to a particular scientific name, but it is often referred to as DST or daylight time adjustment. It is a practice of setting the clocks forward by one hour during the warmer months to extend evening daylight.
Types of table setting?
There are different types of table settings. The most common ones include formal setting, casual setting and buffet table setting among others.
What would be the approximate amperage setting be if a welder were set to the high range 150 to 350 amps and the fine adjustment knob were pointing at 5 on a 10 point scale?
250 amps
What would the approximate amperage setting be if a welder were set to the high range (150 to 350) and the fine adjustment knob were pointing at 5 on a 10-point scale?
dawg we all on these same questions from the same textbooks that are grandparents would’ve thought were ancient
What would the approximate amperage setting be if a welder were set to the high range(150 to 350 amps). And the fine adjustment knob were pointing at 5 on a 10- point scale?
dawg we all on these same questions from the same textbooks that are grandparents would’ve thought were ancient
What would the approximate amperage setting be if a welder were set to the high range (150 to 350 amps) and the fine adjustment knob were pointing at 5 on a 10-point scale?
dawg we all on these same questions from the same textbooks that are grandparents would’ve thought were ancient
What would be the approximate amprage setting be if weder were set t the high range (150 to 350 amps) and he fine adjustment knob were pointingat 5 on a 10 point scae?
250 amps
What is the spark advance setting for a 2001 gmc 4.3?
There is no setting or adjustment. It is done electronically.
Where is the Vibrance setting in Photoshop CS3?
Vibrance adjustment starts with cs4
What is the recommended amperage setting for welding stainless steel?
The recommended amperage setting for welding stainless steel is typically between 50 to 90 amps, depending on the thickness of the material being welded. It is important to consult the welding machine's manual and adjust the settings accordingly for best results.
Timing setting for a 1997 silverado truck?
If its a 350 vorteck there is no adjustment, Its controled by the computor.
When setting ignition timing on ford 302 5.0 engine does the rotor need to pointing to the number one on the distributor cap?
If you are setting the timing with a timing light then it don't matter where the rotor is pointing. But if you are putting the Distributor in then yes. When it is in, It must be pointing to #1 on cap so vaccume advance don't hit the thermostat housing when you adjust the timing with a light.
What is the Timing setting on 1999 4.3l Chevy s10?
There is no timing adjustment, The computer controlls the timing.
Honda shadow carburetor adjustment?
The Honda Shadow carburettor adjustment will be done through the setting of the pilot screws.You would also need to do synchronization so as to compete the adjustment.Ê
