A liquid gas solution is a liquid made up of an element(s) that are normally gas at room temperature. A liquid solid solution is made up of an element(s) that are normally solids at room temperature... Which is around 21 degrees Celsius.
Evaporation is the process and the gas formed by liquid in heated condition is called vapours
If a liquid was to boil to change state, it would be changing from a liquid to a gas, and would be said to be boiling.
gas.
A bubble on the surface of a liquid is formed when air or another gas is trapped within the liquid, typically due to agitation. The surface tension of the liquid creates a thin film around the gas, producing the bubble shape. As the gas inside the bubble expands or contracts, the size of the bubble may change.
Gas is formed from evaporation when a liquid changes into a gas state at a temperature below its boiling point. Evaporation is the process by which molecules escape from the surface of a liquid into the air as vapor.
The cause is the movement of gas bubbles formed in the liquid.
Yes, for example, If you are boiling water, the steam that is coming out of the container is the liquid that formed into a gas.
liquid...how would it be a gas?
The gas phase is formed.
Pockets of gas in a liquid are bubbles trapped within the liquid. These gas bubbles can be formed through processes such as agitation, heating, or chemical reactions. The presence of these gas pockets can affect the properties of the liquid, such as its density and visibility.
A mixture is when you literally put a liquid with a gas/liquid/solid. A mixture is when there is no chemical bonding.
liquid and gas because they both have an ability to flow
A liquid gas solution is a liquid made up of an element(s) that are normally gas at room temperature. A liquid solid solution is made up of an element(s) that are normally solids at room temperature... Which is around 21 degrees Celsius.
Evaporation is the process and the gas formed by liquid in heated condition is called vapours
Condesor- cools the liquid formed gas after compressor compresses. After condensor it pass through the expansion valve, then again liquid formed gas expanses to gas form and produses cooling .this cooled gas then passes through the evaporator coils
When condensation forms in a gas, the gas loses energy and converts into a liquid. This process involves the gas molecules slowing down and coming closer together, leading to a phase change from gas to liquid.