answersLogoWhite

0

Increases first and then decrease

User Avatar

Anonymous

4y ago

What else can I help you with?

Continue Learning about Natural Sciences

What will the mercury thermometer show when it is kept in ice?

The question must be asked carefully. If the thermometer is in water ice and there is no liquid water, and there is one atmosphere of pressure, the thermometer can read anything from the freezing point of water and lower, depending on the range of the thermometer. If the thermometer is in a stable mix of water and ice, it will read the freezing point of water.


What should the temperature reading be for a bimetallic thermometer when calibrating in an ice water bath?

The temperature reading for a bimetallic thermometer when calibrating in an ice water bath should be 0 degrees Celsius (32 degrees Fahrenheit). This is because ice water has a defined temperature of 0 degrees Celsius, which is used as a reference point for calibration.


When using the ice point method to calibrate a thermometer you should?

When using the ice point method to calibrate a thermometer, you should first ensure that the thermometer is clean and free of any contaminants. Next, immerse the thermometer's probe in a mixture of ice and water, ensuring that the probe does not touch the sides or bottom of the container. Allow the thermometer to stabilize for a few minutes, then check the reading; it should be at or very near 0°C (32°F). If necessary, adjust the thermometer according to the manufacturer's calibration instructions.


If one thermometer is above ice cube and other is below at the same distancewhich thermometer reading changes and why?

If both thermometers were at room temperature before you arranged them above and below the ice cube, then the one below should show a greater change, and sooner, than the one above. The ice cools the air around it, causing the air around it to become more dense than the air at room-temperature. The cool air then sinks, right past the lower thermometer.


What is the ice point on a thermometer called?

Depends on the scaling on the thermometer. 0°C 273.16K 32°F 459.67°R

Related Questions

Where a thermometer should be kept in determining melting point of ice?

A thermometer should be immersed in the ice water mixture in order to accurately determine the melting point of ice. This ensures that the thermometer is in direct contact with the substance being measured and will provide a precise reading of when the ice starts to melt.


What will the mercury thermometer show when it is kept in ice?

The question must be asked carefully. If the thermometer is in water ice and there is no liquid water, and there is one atmosphere of pressure, the thermometer can read anything from the freezing point of water and lower, depending on the range of the thermometer. If the thermometer is in a stable mix of water and ice, it will read the freezing point of water.


How do you measure the temperature of ice water?

You can measure the temperature of ice water using a thermometer designed for lower temperatures. Place the thermometer in the ice water and wait until the reading stabilizes to get an accurate measurement.


What should the temperature reading be for a bimetallic thermometer when calibrating in an ice water bath?

The temperature reading for a bimetallic thermometer when calibrating in an ice water bath should be 0 degrees Celsius (32 degrees Fahrenheit). This is because ice water has a defined temperature of 0 degrees Celsius, which is used as a reference point for calibration.


Why can't you put a thermometer in a bowl of slurry ice?

Putting a thermometer into a bowl of slurry ice is a common method of calibrating it. It should read 0C or 32F. However, if the range of the thermometer does not include 0C or 32F, then this method of calibration won't work, so don't try to use it in that case.


What does LL.L mean on the temperature read of a GE digital thermometer?

LL.L on a GE digital thermometer usually indicates that the temperature reading is below the thermometer's measurable range. This could be due to the thermometer being too far away from the object being measured or the object being too cold for the thermometer to register a reading.


When using the ice point method for calibrating thermometer you need to place the thermometer in the ice water you need to adjust the thermometer until is read what degrees?

When using the ice point method for calibrating a thermometer, you need to place the thermometer in a mixture of ice and water. Adjust the thermometer until it reads 0 degrees Celsius, the freezing point of water. This helps ensure that the thermometer is accurately measuring temperatures.


How a thermometer can be callibrated?

A thermometer can be calibrated by placing it in a temperature-controlled environment, such as an ice bath or boiling water, and adjusting the reading to match the known temperature. This process ensures the accuracy of the thermometer readings and allows for corrections to be made if there are any discrepancies. Calibration should be done regularly to maintain the reliability of the thermometer.


How do you verify ice point of mercury thermometer?

To verify the ice point of a mercury thermometer, place the thermometer in a mixture of crushed ice and water, stirring gently. Allow the thermometer to stabilize for a few minutes, ensuring the mercury column remains constant. The temperature indicated by the thermometer should match the expected ice point of 0°C (32°F).


How do you calibrate an unmarked thermometer?

To calibrate an unmarked thermometer, you can place it in a known temperature source, such as an ice bath or boiling water, and compare the reading to the actual temperature at that point. Adjust the thermometer accordingly by using a small wrench to rotate the calibration nut until the correct temperature is displayed.


What type of the thermometer would use to measure the temperature of ice?

You can use a digital or analog thermometer to measure the temperature of ice, but it's best to use a thermometer that can measure low temperatures accurately. A thermometer that measures from -50°C to 50°C would be suitable for measuring the temperature of ice.


Three steps in calibrating a thermometer?

Fill a container with crushed ice and water, stirring to ensure uniform temperature. Immerse the thermometer probe into the ice water for several minutes until the reading stabilizes. Adjust the thermometer's calibration screw or electronic settings until it reads 0°C or 32°F, depending on the scale used.