74LCXH16245Low Voltage 16-Bit Bidirectional Transceiver with Bushold
General Description The LCXH16245 contains sixteen non-inverting bidirec- tional buffers with 3-STATE outputs and is intended for bus oriented applications. The device is designed for low volt- age (2.5V or 3.3V) VCC applications with capability of inter- facing to a 5V signal environment. The device is byte controlled. Each byte has separate control inputs which could be shorted together for full 16-bit operation. The T/R inputs determine the direction of data flow through the device. The OE inputs disable both the A and B Ports by placing them in a high impedance state. The LCXH16245 data inputs include active bushold cir- cuitry, eliminating the need for external pull-up resistors to hold unused or floating data inputs at a valid logic level. The LCXH16245 is fabricated with an advanced CMOS technology to achieve high speed operation while maintain- ing CMOS low power dissipation abricated with an advanced CMOS technology to achieve high speed operation while maintain- ing CMOS low power dissipation FOR 74lcxh16245 pdf download http://www.chinaicmart.com/suppliers/773/74LCXH16245.html
ic power ta 38
the suffix -ate. chlorate -> chloric acid; carbonate -> carbonic acid
the ic and each section chief in the ics
You didn't specify what area so.. IC System Inc.#1...444 E.Highway 96, St.Paul,MN. 55127, 1-800-443-4123. IC System Inc#2...Suite 225, 5201 Congress Avenue,Bocca Raton, FL. 33487, 1-800-683-5633. IC Sytem Inc. #2 (branch)..Suite 231, 5501 N.Swan Rd., Tucson, AZ. 85718, 1-520-577-0173.
It will end in -ic acid. For example perchlorate --> perchloric acid
Read the part number and read the data sheet
Type LM567 datasheet into Google, fool!
1)address lines to refer to the address of a block 2)data lines for data transfer 3)IC chips 4 processing data
Smart card is generally referred to a card bearing an integrated circuit (IC). Typically, the IC has an operating system of its own and runs an application on it for storing the user data. A terminal with smart card reader is generally used for reading & writing the IC.
smart card and IC card or ICC cards are same things.These are a cradit card size cards which have an IC chip which can process the data .
it can be done using L293d ic , the ic can control two motors. refer the data sheet for the connections and circuit. L293d also has inbuilt H-bridge.
The IC code is on the actual IC, you can find out its details by searching the IC code on Google.
1)address lines to refer to the address of a block 2)data lines for data transfer 3)IC chips 4 processing data
yes you can use IC 7805 as constant current source, Please see the data sheet application for LM7805 in typical application but you must know what the temp that IC 7805 is working at becomes the output voltage drift is - 0.8 mV/C at Vin =10 volt.
ic made from bjt is known as bipolar ic
op amp linear ic 7805 non linear ic
The letters "IC" pronounced properly can say "icy" meaning very cold.