You're looking at 130v light bulbs? Well...the answer is "nowhere." A 130v light bulb has a heavier-duty filament in it than a 120v bulb does, so the bulb will last longer. Put it in a regular socket and it will work fine.
Choose a bulb with the same voltage as your fixture to prevent damage or risk of overheating. If the fixture specifies 120 volts, use a 120-volt bulb. If in doubt, consult the manufacturer's instructions or a professional electrician.
No, the electrical insulation rating of a 15 amp duplex receptacle is only rated at 130 volts. The 15 amp 240 volt receptacle is rated at 250 volts. The 240 volt receptacle also has a tandem pin configuration instead of the parallel configuration of the 120 volt device. The different pin configuration is so that a 120 volt electrical device can not be plugged into a 240 voltage receptacle.
Using a 120 volt bulb in a 130 volt socket may cause the bulb to burn out more quickly or not function properly. The higher voltage from the socket can lead to a higher current flowing through the bulb, which can damage it or cause it to fail prematurely. It is always best to match the voltage of the bulb with the voltage of the socket for optimal performance and safety.
Yes, a 130 watt fan can be plugged into a 120 volt receptacle. The current draw will be I = W/E, Amps = Watts/Volts = 130/120 = 1.08 amps.
12-V a.c. is a root-mean-square value, which is exactlyequivalent to 12-V d.c., so the brightness of the lamp will be identical, regardless of whether it is connected to an a.c. or d.c. source.
If you meant 120 Volt AC, for use in US, CAnada and other countries which use similar 60 Hz electrical power supplies, yes.If you meant 230 Volt AC, for use in Europe and other countries which use similar 50 Hz electrical power supplies, yes.For more information see the answer to the Related Question shown below.
Yes, in fact that is what a rough service bulb is rated at. The bulb used on a 120 volt system will have a reduced wattage output as to what it would be on 130 volts.
It is not recommended to use a 120 volt bulb in a 130 volt socket as it can cause the bulb to burn out faster or even lead to safety hazards. It is important to match the voltage rating of the bulb with the socket for optimal performance and safety.
130 volt light bulbs have a longer lifespan and are more durable compared to standard voltage bulbs. They are less likely to burn out quickly and can withstand power fluctuations better.
Yes. The bulb will be slightly dimmer, but will last much longer. Most 145V bulbs are intended to be used in 120V exit signs. The reason for the higher voltage rating on the bulb is because it will last a long, long time when used at 120V.
The recommended voltage for 130-volt light bulbs is 130 volts.
Choose a bulb with the same voltage as your fixture to prevent damage or risk of overheating. If the fixture specifies 120 volts, use a 120-volt bulb. If in doubt, consult the manufacturer's instructions or a professional electrician.
No, the electrical insulation rating of a 15 amp duplex receptacle is only rated at 130 volts. The 15 amp 240 volt receptacle is rated at 250 volts. The 240 volt receptacle also has a tandem pin configuration instead of the parallel configuration of the 120 volt device. The different pin configuration is so that a 120 volt electrical device can not be plugged into a 240 voltage receptacle.
if power consumption is 130 KW. how can it convert into unit per hour.
It is not recommended to use a 130 volt light bulb in a 120 volt socket as it may cause the bulb to burn out prematurely or even pose a safety hazard. It is best to match the voltage rating of the bulb with the voltage of the socket to ensure proper function and safety.
All other things being equal, an incandescent light should not "flicker" whether it is connected to 120 or 130 VAC.
yes, most 115 volt devices will work with any voltage from 100 to 130 volts with no problem.