These are the names given to the bottom of the thoracic vertebrae. Attached to these two bertebrae are the floating ribs.
It depends on the wattage of each T12 fluorescent tube. However, a typical T12 fluorescent tube is around 40 watts. So, if you have a total of 200 watts available, you could power five T12 fluorescent tubes.
T12 and F12 tubes have different diameters - T12 tubes are 1.5 inches in diameter while F12 tubes are 1 inch in diameter. They are not interchangeable because they have different fixtures and ballasts. T12 tubes are being phased out due to energy efficiency regulations.
The T11 vertebra is located in the middle of the thoracic spine, which is the region of the spine in the mid-back area. It is two levels below the last rib and one level above the T12 vertebra.
In physiology, T1 through T12 refers to the thoracic vertebrae in the spine. These vertebrae are located in the upper and mid-back region and are responsible for providing structural support and protecting the spinal cord. Each thoracic vertebrae has a specific anatomical structure and function in the overall movement and stability of the spine.
Yes, you can use a 32 watt T12 fluorescent lamp in a fixture that previously housed a 40 watt T12 fluorescent lamp. However, the light output will be slightly lower. It's advisable to check the fixture's compatibility with the lower wattage lamp to ensure proper performance.
It depends on the wattage of each T12 fluorescent tube. However, a typical T12 fluorescent tube is around 40 watts. So, if you have a total of 200 watts available, you could power five T12 fluorescent tubes.
The only difference between Y12 and T12 is the Kilos per meter. In a Y12 there is 0.888 Kilos and a T12 bar has 0.612 Kilos.
That would be the thoracic vertebrae. (. . . of the thorax), and there are 12 of them - T1 through T12.
T12 and F12 tubes have different diameters - T12 tubes are 1.5 inches in diameter while F12 tubes are 1 inch in diameter. They are not interchangeable because they have different fixtures and ballasts. T12 tubes are being phased out due to energy efficiency regulations.
An area of bone tissue that appears abnormal/ unhealthy located on the 12th Thoracic vertebrae and is losing it function/ scarring.
T8 bulbs are thinner and more energy-efficient than T12 bulbs. T8 bulbs have a diameter of 1 inch, while T12 bulbs have a diameter of 1.5 inches. T8 bulbs also produce more light and have a longer lifespan compared to T12 bulbs.
The main difference between a T8 and T12 bulb is their size and energy efficiency. T8 bulbs are smaller in diameter and more energy efficient than T12 bulbs. T8 bulbs also produce more light output for the same amount of energy compared to T12 bulbs.
No, T8 and T12 LED bulbs are not interchangeable because they have different sizes and require different ballasts.
The main differences between T8 and T12 fluorescent light bulbs are their size and energy efficiency. T8 bulbs are smaller in diameter and more energy efficient than T12 bulbs. T8 bulbs also produce more light and have a longer lifespan compared to T12 bulbs.
The T11 vertebra is located in the middle of the thoracic spine, which is the region of the spine in the mid-back area. It is two levels below the last rib and one level above the T12 vertebra.
The main difference between T8 and T12 fluorescent light bulbs is their size and energy efficiency. T8 bulbs are smaller in diameter and more energy-efficient than T12 bulbs. T8 bulbs also produce more light output and have a longer lifespan compared to T12 bulbs.
The main differences between T8 and T12 fluorescent light bulbs are their size and energy efficiency. T8 bulbs are smaller in diameter and more energy efficient than T12 bulbs. T8 bulbs also produce more light and have a longer lifespan compared to T12 bulbs.