answersLogoWhite

0

Oxygen

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Natural Sciences

Why is a filament light bulb not filled with oxygen?

A filament light bulb is not filled with oxygen because oxygen can cause the filament to burn quickly. The bulb is usually filled with an inert gas like argon to prevent the filament from burning out too quickly and to protect it from oxidation.


How many cubic feet of air must be supplied to burn 1 cubic feet of gas?

Approximately 10-15 cubic feet of air is needed to burn 1 cubic foot of gas, depending on the type of gas and the specific combustion conditions. This is known as the stoichiometric ratio, which ensures complete combustion of the gas.


Is all the air vacuumed out of a light bulb or is special air pumped in?

In a light bulb, the air is typically vacuumed out to create a vacuum or low-pressure environment inside the bulb. This helps to prevent the filament from burning out too quickly and improves the efficiency of the bulb. Sometimes, inert gases like argon or nitrogen are used instead of a vacuum to prolong the life of the filament.


Why pure NH3 does not burn in air but impure PH3 burn in air?

With traces of P2H4 present, PH3 is spontaneously flammable in air


Why do bulb filament not burn?

The filament does not "burn", it just glows brightly. If some air were present in the bulb - as sometimes happens if a light bulb gets knocked and gets even a tiny crack in its glass bulb - then the oxygen present in ordinary air will quickly make the filament burn away.For more information see the answer to the Related question sghown below.

Related Questions

Which gas in the air burn's out the filament?

Oxygen is the gas in the air that burns out the filament in an incandescent light bulb. When the filament reacts with oxygen at high temperatures, it oxidizes and eventually burns out.


What gas in the air is needed for something to burn?

Oxygen is needed to feed the flame.


Why is there argon gas in the light blub and not air?

The hot filament of a light bulb would quickly burn away if it came in contact with oxygen from the air. Argon is inert and so will not react with the filament, even at extremely high temperatures.


Do you burn more gas with your air conditioner on?

Do you burn gas when you run your air conditioning in your cae


Why is a light bulb sealed?

A light bulb is sealed to prevent air from entering the bulb, which can cause the filament to burn out quickly. The vacuum or inert gas inside the bulb helps to preserve the longevity of the filament and ensures consistent lighting performance.


In a bulb noble gas argon is used . why is argon is used instead of air in the light bulb?

Argon is used in light bulbs because it is an inert gas, which means it does not react with the filament or the glass envelope of the bulb. This helps to extend the life of the bulb by preventing the filament from degrading. Additionally, argon helps to reduce the rate of evaporation of the filament, leading to a longer-lasting bulb.


Which gas in the air is needed for fuels to burn?

oxygen is needed for fuel to burn


How many gallons of air to burn a gallon of gas in an internal combustion engine?

Approximately 5,000 gallons of air are needed to burn one gallon of gasoline in an internal combustion engine. This air combines with the fuel in a precise ratio for efficient combustion to power the engine.


Why are light bulbs filled with argon and not air?

Light bulbs are filled with argon instead of air because argon is an inert gas that helps prevent the filament from oxidizing and burning out quickly. Air contains oxygen, which can cause the filament to degrade faster due to oxidation. Argon creates a more stable environment inside the bulb, prolonging the life of the filament.


Light bulbs last longer when they are filled with what gas?

Incandescent light bulbs need to have an inert gas or a vacuum to prevent the filament from being surrounded by air (with oxygen) which would enable the filament to catch fire and burn. Inert gases used include argon, krypton and nitrogen or some combination of them.


Why is a filament light bulb not filled with oxygen?

A filament light bulb is not filled with oxygen because oxygen can cause the filament to burn quickly. The bulb is usually filled with an inert gas like argon to prevent the filament from burning out too quickly and to protect it from oxidation.


What gas is needed to burn paper?

Oxygen.