you must go to wyotec
Yes, the halogen bulb would provide about 30% more brightness (lumens) for the same electric power rating. So 70 watt halogen is about equal to 90-100 watt incandescent.
Yes, you can use a dimmer switch with a combination of halogen and incandescent fixtures. However, it's essential to make sure that the dimmer switch is compatible with both types of bulbs to avoid any potential issues such as flickering or buzzing. Additionally, double-check the wattage rating of the dimmer switch to ensure it can handle the combined load of the fixtures.
A halogen lamp is an incandescent lamp with a tungsten filament contained within an inert gas and a small amount of a halogen such as iodine or bromine.More detailsA special physical feature is exploited in halogen lamps: when small amounts of a halogen gas were added to the contents of a normal incandescent light bulb, these were found to help to return large quantities of evaporated tungsten atoms back to the filament.This treatment results in a significantly longer lifetime of such lamps.Additionally it has the benefit that halogen light bulbs can be operated at a higher temperature than can be used for ordinary light bulbs. This results in less heat production compared to light output and an overall much higher efficiency in the conversion of the energy input (electrical energy) to the energy output as light.General note about how all incandescent filament light bulbs operateAn electrical current travelling through the filament of a light bulb makes it glow white-hot and generate both light and heat because of the electrical resistance of the filament.The filament is normally mounted within a special mixture of noble and/or inert gases held inside the glass enclosure of the light bulb, held at a pressure which is close to a vacuum.The special mixture of gases prevents the filament from oxidizing and burning away, which would happen extremely quickly if it glowed white-hot in normal air which contains oxygen.
Halogen bulbs flicker on a dimmer because dimmer switches are designed for use with incandescent bulbs, not halogen bulbs. The electrical properties of halogen bulbs, such as their lower resistance when dimmed, can cause flickering when used with dimmer switches not specifically designed for them. Upgrading to a dimmer switch that is compatible with halogen bulbs can help eliminate the flickering.
Incandescent produces about 10 lumens of light per watt of electricity Halogen produces about 13 lumens per watt Fluorescent and CFL produce about 50 lumens per watt So Fluorescent is the most efficient.
Halogen lighting is more energy-efficient and produces a brighter, whiter light compared to incandescent lighting. Halogen bulbs also have a longer lifespan and are more expensive than incandescent bulbs.
Halogen light bulbs are what has been around for a very long time. Incandescent bulbs are new and are more energy efficient.
Incandescent lighting uses a filament that heats up to produce light, while halogen lighting uses a tungsten filament surrounded by a halogen gas to increase efficiency and lifespan.
The main differences between incandescent and halogen lighting technologies are the gases used inside the bulb and the filament material. Incandescent bulbs use inert gases like argon or nitrogen, while halogen bulbs use a small amount of halogen gas. Halogen bulbs also have a tungsten filament surrounded by a small amount of halogen gas, which allows the filament to last longer and operate at higher temperatures.
Halogen light bulbs are more energy-efficient and have a longer lifespan compared to incandescent light bulbs. Halogen bulbs use less energy to produce the same amount of light as incandescent bulbs, and they also last longer before needing to be replaced.
Halogen bulbs typically have an inrush current that is approximately 10 to 12 times their operating current. This high initial current draw is due to the cold resistance of the filament and the initial surge required to heat it up to operating temperature.
Halogen bulbs typically operate at higher temperatures than incandescent bulbs because of their tungsten filament design, which allows them to produce brighter and whiter light. This can make halogen bulbs hotter to the touch compared to traditional incandescent bulbs.
Halogen bulbs are about 30% more efficient so a 70 watt halogen does the job.
Yes, the halogen bulb would provide about 30% more brightness (lumens) for the same electric power rating. So 70 watt halogen is about equal to 90-100 watt incandescent.
There are two types of lamps the tungsten halogen lamps and incandescent lamps. Tungsten Halogen Lamps are similar to incandescent lamps and produce light in the same manner from a tungsten filament; however the bulb contains a halogen gas (bromine or iodine) which is active in controlling tungsten evaporation, whereas the incandescent lamp suppresses tungsten evaporation.
The halogen bulb needs 30% less power for the same amount of light, so a 45 w halogen replaces a 65 w normal incandescent.
A halogen light emits more heat than an incandecent light.