The medium filament will be the light producer. This is because that filament is connected to the center pin of the lamp base the same as ordinary light bulbs. If the tri-light bulb is 50, 100 and 150 watts, the 100 watt portion will light.
The wattage of bulb one uses in a bedroom lamp depends on several factors. If it is a lamp used for back ground lighting or a night lamp, one would use a very low wattage bulb. If it is for a bedroom reading lamp, one would want a stronger wattage. The biggest factor on deciding what wattage to use is the wattage suggested by the lamp manufacturer. All lamps are marked with recommend bulb wattage.
Yes, you can use a halogen bulb in a regular lamp as long as the bulb wattage does not exceed the lamp's recommended wattage limit. Additionally, be careful when handling halogen bulbs as they can get very hot during operation.
You should not use a higher wattage bulb in a lamp that says 40 watts. The higher wattage could cause the lamp to catch fire due to the excess heat and could cause you serious electrical problems.
Yes, as long as the voltage is the same and the bulb has the same or less wattage. The fixture is rated at a certain wattage that can be found on a label somewhere on the fixture. Never use a larger wattage than what is stated on this label.
from a WATTAGE point of view, yes; it is always electrically safe to switch to a smaller wattage if the larger wattage was setup in an approved manner. from a HEAT point of view, don't change a lamp until it cools off unless you have proper gloves yes, but not the other way 'round
The wattage of bulb one uses in a bedroom lamp depends on several factors. If it is a lamp used for back ground lighting or a night lamp, one would use a very low wattage bulb. If it is for a bedroom reading lamp, one would want a stronger wattage. The biggest factor on deciding what wattage to use is the wattage suggested by the lamp manufacturer. All lamps are marked with recommend bulb wattage.
The maximum wattage of a 3-way bulb that can be used in this lamp is 150 watts.
the bulb is usually 30 or 40 watts
Yes, you can use a halogen bulb in a regular lamp as long as the bulb wattage does not exceed the lamp's recommended wattage limit. Additionally, be careful when handling halogen bulbs as they can get very hot during operation.
To choose a 3-way 150 watt bulb for your lamp, check the lamp's maximum wattage rating, then select a 3-way bulb that does not exceed this wattage. Look for a bulb with the desired brightness levels and ensure it fits the lamp's socket size.
You should not use a higher wattage bulb in a lamp that says 40 watts. The higher wattage could cause the lamp to catch fire due to the excess heat and could cause you serious electrical problems.
Find the wattage rating on the dimmer controller. This is the maximum allowable wattage that the lamp in the fixture should be. Lamp wattage ratings under the rated dimmer wattage is fine but do not install a larger wattage lamp that is over the dimmer control's rating.
When choosing a light bulb for your lamp, consider the wattage, color temperature, and type of bulb. Make sure the wattage is appropriate for your lamp, choose a color temperature that suits your preference, and select between LED, CFL, or incandescent bulbs based on energy efficiency and longevity.
Find out what the wattage of the bulb in the fixture is and you will have your answer.
Yes, as long as the voltage is the same and the bulb has the same or less wattage. The fixture is rated at a certain wattage that can be found on a label somewhere on the fixture. Never use a larger wattage than what is stated on this label.
from a WATTAGE point of view, yes; it is always electrically safe to switch to a smaller wattage if the larger wattage was setup in an approved manner. from a HEAT point of view, don't change a lamp until it cools off unless you have proper gloves yes, but not the other way 'round
Yes. Lower wattage would be safe for the lamp wires and components.