Depends on the amount of toothpicks
Twigs burn faster than logs because the heat of the fire can wrap around the twigs quicker. Fires won't be able to penetrate through logs as quick because they are deeper.
It is easier to light a fire from kindling than from a log because kindling consists of smaller, dry materials that catch fire quickly and burn at a higher temperature. This rapid ignition creates enough heat to ignite larger pieces of wood, like logs, which require more sustained heat due to their density and moisture content. Additionally, the increased surface area of kindling allows for more efficient airflow and combustion.
Duraflame fire logs typically burn at temperatures ranging from 1,000 to 1,200 degrees Fahrenheit. These specially designed logs are engineered to provide consistent and efficient heat output for use in fireplaces and wood stoves.
It depends on the size of the fire pit and the size of the logs. Typically, you can burn 2-4 logs at a time in a standard-sized fire pit. It's important not to overload the pit to prevent the fire from getting out of control.
Duraflame logs are made with a blend of waxes, including paraffin wax. This wax blend helps the logs burn efficiently and cleanly.
While you can burn most woods, I would pass on the arborvitae. As an evergreen, you will get a LOT of creosote, fast burning, short lasting fires. It also contains a toxin believed to be a hallucinogen. A small amount used as kindling may not be a problem.
They burn at the same pace. (If you can't find coal, put wooden logs in the furnace to make charcoal! It has the same uses as coal!)
Small sticks burn faster than logs because they have a higher surface area to volume ratio, allowing oxygen to reach more of the material during combustion. This increased oxygen availability leads to a faster rate of burning. Logs, on the other hand, have a lower surface area to volume ratio and thus burn more slowly.
Twigs burn faster than logs because the heat of the fire can wrap around the twigs quicker. Fires won't be able to penetrate through logs as quick because they are deeper.
It all depends what level your firemaking is. if your firmaking was 60 (Just high enough to burn yews) you would have to burn just under 63,000 yew logs. I would suggest burning maple logs, you would have to burn around 93k but it's a lot cheaper, but if you want it done fast yews is the way to go.
It all depends what level your Firemaking is. lets say your Firemaking is 58 (Just high enough to burn eucalyptus logs) you would have to burn just over 66,000 eucalyptus logs.
It all depends what level your Firemaking is. if your Firemaking is 60 (Just high enough to burn yews) you would have to burn just under 63,000 yew logs. I would suggest burning maple logs, you would have to burn around 93k but it's a lot cheaper, but if you want it done fast yews is the way to go.
you will need to burn 217k for lvl 15-99 firemaking, but i would suggest maple logs because you only need to burn 95k of them and they a reasonable cheap, 100k maple logs is around 4mil, which isn't bad for a 99
24814 Maple Logs.
you would have to burn 96,551 maple logs and you need 13,034,366 experience to go. Hope this helped.
Yes. Next question?
Some Yule logs that are available commercially have green and red flames when they burn. The chemicals that cause the colored flames are barium and strontium.