answersLogoWhite

0

What else can I help you with?

Related Questions

Temperature at which ferrite starts to form on cooling?

Ferrite starts to form on cooling at the Curie temperature, which is around 768°C for pure iron. As the temperature decreases below the Curie temperature, ferrite begins to form in a process known as the ferritic transformation.


What is the difference between pearlite and ferrite?

Pearlite is a layered structure of ferrite and cementite formed by the eutectoid reaction in steel, while ferrite is a pure form of iron in its BCC crystal structure. Ferrite is soft and ductile, while pearlite is harder due to the presence of cementite.


What is delta ferrite?

Delta ferrite is a type of microstructure found in some stainless steels and other alloys. It is a magnetic phase that forms at high temperatures and can affect the mechanical properties of the material. Delta ferrite can impact the corrosion resistance, toughness, and weldability of the alloy.


The word elements used to form medical words are?

Root words, prefixes, and suffixes are the elements used to form medical words. Prefixes are added to the beginning of a root word, and suffixes are added to the end. These elements can modify the meaning of the root word to create specific medical terms.


What conditions of a Supernova cause elements that are heavier that iron to form?

The rapid collapse of the star compresses atoms together and may cause nuclear fusion and make heavier elements.


What causes chemical compounds to form?

The reaction of two elements that are reactive with each other cause a compound to form. ~Chodeman ;)


What is the difference between ferrite bead and an inductor and On what basis they have to be selected?

Ferrite bead is a lossy inductor.When the frequency is high the Ferrite bead purely acts as a resistance so high speed noises are absorbed by the FB and it dissipate in the form of heat. Based on the current rating,cross over frequency the ferrite bead should be select ANSWER: A ferrite bead is a powder core if a line is wrapped on it that will eliminate RF signal externally injected into the line to interfere with the circuit that the line is going to it. The selection is arbitrary until it does the job. bigger the better. An inductor is also a choke to reduce RF but not as effective and it does have losses on the line


How did the table of elements change each time you added new elements?

As new elements were discovered and added to the periodic table, the elements were arranged based on their increasing atomic number and similar chemical properties. This resulted in new rows being added to accommodate the additional elements, expanding the table's size and complexity. The periodic table evolved to its current form with the addition of new elements and improvements in our understanding of atomic structure.


What elements can be chemically combined with gold?

Gold can chemically combine with elements such as silver, copper, zinc, and nickel to form various alloys. These alloys can have different properties, such as increased strength or different colors, depending on the elements added.


Which aqueous ion causes a white precipitate to form when acidified aqueous silver nitrate is added to it?

Chloride ions (Cl-) cause a white precipitate (silver chloride) to form when acidified aqueous silver nitrate is added to it.


What is the Difference between alpha iron and ferrite?

Alfa iron: An allotropic modification of iron which crystallises in the b.c.c stystem and is stable below 9120C.Ferrite: is the term applied to substanitially pure alfa-iron occuring in iron-carbon alloys. it is precipitated durng the cooling of steels containing less than 0.85%C, and is called to distinguish it from the iron the eutectoid


What is the difference between an alnico magnet and ferrite magnet?

The term alnico is derived from the names of three metals, aluminum, nickel, and cobalt, which can be used to make an alloy that has useful magnetic properties. Ferrite is a form of iron. Alnico magnets are more powerful and more expensive than ferrite magnets.