0
What else can I help you with?
Why is it easier to push an empty box on the surface than a full box?
Because the air that is in the full box is being pushed while the other box that is empty has no air at all for it to be heavy.
What plastics are in a plastic bottle?
It depends on whether the bottle is full or empty. If full, it could contain anything. If empty, it probably contains air, which is a mixture of elements....nitrogen, oxygen, argon etc
What rolls faster a empty soda can or a full soda can?
An empty soda can will typically roll faster than a full soda can due to its lighter weight. The full can has more mass, leading to increased inertia which slows down its rolling speed compared to the empty can.
How many empty 16.9oz plastic bottles does it take to equal a pound?
Well, isn't that a lovely question! You see, a 16.9oz plastic bottle is about 1.05625 pounds when it's empty. So, it would take roughly 0.9464 bottles to equal a pound. Just remember, every bottle has its own unique beauty, just like every little tree in our happy little world.
What can of soda would go faster an empty one or one that is full?
An empty soda can would likely go faster than a full one when rolling or sliding due to its lighter weight. The full can's mass would make it harder to accelerate and maintain speed compared to the empty can.
Which is heavier a full argon cylinder or an empty?
A full cylinder is heavier than empty. The cylinder is filled by weight.
If 3 bottles for are full and 3 are empty how do you make them full empty full etc?
Stand them up in series, then alternate.
Which is heavier a full oxygen cylinder or a empty?
Gas cylinders weigh about the same whether full or empty.
What is an empty for full issuing system is most commonly used for?
The bartender is required to retain empty liquor bottles, and then each empty liquor bottle is replaced with a full one at the beginning of the next shift. The empty bottles are then either broken or disposed of as local beverage law requires.
Filling empty argon bottle from full argon bottle with manifold?
To fill an empty argon bottle from a full one using a manifold, connect the full bottle to the manifold with a high-pressure hose. Open the valves on both bottles, allowing the argon gas to flow from the full bottle to the empty one. Monitor the pressure gauge to ensure the transfer is complete and disconnect the bottles once done.
What is a empty glass full of water?
An empty glass full of
What is value of 7 peace train set full of bourbon?
The bottles empty are not worth much as is - if they were sealed in original boxes (very rare) they can be quite expensive - best to find someone that wants them for there collection of bottles instead of train buff's.
Why is it harder to get a cart full of potatoes then the one that's empty?
A cart full of potatoes is heavier, making it more difficult to push than an empty cart due to the additional weight. The potatoes also shift and create friction, causing more resistance when moving the cart.
When was Full-Empty created?
Full-Empty was created in 1994.
Why is it easier to push an empty box on the surface than a full box?
Because the air that is in the full box is being pushed while the other box that is empty has no air at all for it to be heavy.
The opposite of empty is?
occupiedFull, occupied, overflowing...
Why empty bottle is more stable than full one?
full bottles are top heavy. half full one's are not. The above answer is only true if the bottle is shaped so there is more water in the top half then the bottom half when full. Otherwise the bottle is not top heavy. It is just as heavy (or sometimes only slightly less heavy) on top as it is on bottom. Where as a half empty bottle has a heavier base to keep it from toppling over easier. The same principle is used in the engineering of skyscrapers. The foundation goes deep into the ground and weighs many times the weight of the top so it will not fall because of a windy day.
