0
What else can I help you with?
How many pounds of force is it to push a 5 gallon bucket under water?
The force required to push a 5-gallon bucket underwater would depend on the buoyancy force exerted by the volume of water displaced by the bucket. This force would be equal to the weight of the water displaced, which can be calculated based on the density of water (about 62.4 pounds per cubic foot). Therefore, you would need a force greater than the buoyancy force to push the bucket underwater.
When water in a beaker is heated bubbles come out to the surface why?
When a droper is dipped into water and its bulb is pressed air bubbles seems to occur in water because the dropper was filled with air before it was dipped in water and when we press the bulb air comes out forming air bubbles and the space is filled with water .
If a bucket weighs 8 kilograms when full of water and it weighs 4.8 kilograms when half full of water what does it weigh when it is a quarter full of water?
8 kg is the weight of the bucket plus a full bucket of water. 4.8 kg is the weight of the bucket plus half a bucket of water.8 = b + w4.8 = b + w/2Subtract #2 from #1 to get3.2 = w/2so6.4 = wsubstitute that into #1 to get 1.6 kg for the bucket.The question is what is the weight with w/41.6 kg for the bucket and (4.8)/4 for the water1.6 + 1.2 = 2.8 kg ■
Have you ever drawn water from a well and felt that the bucket of water is heavier when it is out of the water?
No, I haven't. But, when the bucket is in the water, the weight is supported by the water in the well. Once the bucket is raised out of the water, the weight is no longer supported, and the full weight of the bucket and the water within the bucket is felt as it is raised towards the surface.
What compound is inside bubbles of boiling water?
These bubbles contain air.
Why are bubbles formed when an empty mug is tilted in a bucket of water?
Bubbles are formed when an empty mug is tilted in a bucket of water due to air trapped inside the mug releasing and rising to the surface of the water. As the mug tilts and water flows in, air that was previously trapped inside is displaced, creating bubbles that rise to the surface.
Why bubbles are produced when dipped an empty bottle in a bucket of water?
When you dip an empty bottle into water, air trapped inside the bottle escapes as bubbles due to the change in pressure and displacement of water. The air inside the bottle seeks to balance with the external pressure of the water, causing it to escape in the form of bubbles.
What gets hotter a bucket of water a empty bucket?
The bucket full of water because liquids heat up faster than solids.
If the weight of bucket filled with water is fifty kg and weight of the half filled water bucket is 30kg then what is the weight of the empty bucket?
To solve this problem, we need to understand the concept of buoyancy. When the bucket is half-filled with water, the water exerts an upward buoyant force equal to the weight of the water displaced. Since the weight of the half-filled bucket is 30kg, the weight of the water in the bucket is 30kg. This means the weight of the empty bucket is 20kg (50kg - 30kg = 20kg).
How do you pick up water after spilling a bucket full on the floor?
right click, right triger, or tap on it with an empty bucket in hand
If I have a bucket of water that holds 4 gallons of water and another bucket that holds 7 gallons of water. The buckets have no markings. How can I go to the well and bring back exactly 5 gallons?
Fill the 4 gal bucket and empty it into the 7 gal bucket. Fill the 4 gal bucket and then fill the 7 gal bucket from the 4 gal. This leaves 1 Gallon in the 4 gallon bucket. Empty the 7 gallon bucket and pour the gallon from the 4 gal lbucket into it. Fill the 4 gal bucket and pour it into the 7 gal bucket. You then have 5 gallons in the 7 gallon bucket.
How do you get 2 liters of water with a 7liters and 3liters bucket?
Fill the 7lt bucket and use this to fill the 3lt bucket leaving 4 lts in the 7lt bucket. Empty the 3lt bucket and then 1/3rd fill again This will leave 2lts in the 7lt bucket.
If you had a 5 gallon bucket and a 3 gallon bucket how would you get 4 gallons?
you fill the 3 gallon bucket into the 5 gallon bucket twice 2 *3 6 gallons but the 5 gallon will only overflow once it hits 5 gallons. You get the 1 gallon half in the 3 gallon bucket and dump the water out of the 5 gallon bucket. You pour the 1 gallon left from the 3 gallon bucket into the 5 gallon bucket and then refill the 3 gallon bucket and put the 3 gallons in making 4 gallons.
How many pounds of force is it to push a 5 gallon bucket under water?
The force required to push a 5-gallon bucket underwater would depend on the buoyancy force exerted by the volume of water displaced by the bucket. This force would be equal to the weight of the water displaced, which can be calculated based on the density of water (about 62.4 pounds per cubic foot). Therefore, you would need a force greater than the buoyancy force to push the bucket underwater.
How do you get water out of a bucket?
Well, first you take the bucket, then you tip it over and... TA DA! You, my friend, have an empty water bucket(: Do you understand or should I break it down more for you? Because it sure sounds like you aren't really the thinking type(;
I have a bucket of water that holds 4 gallons of water and another that holds 7 gallons of water. The buckets have no markings. How can I go to the well and bring back exactly 5 gallons of water?
# Start with empty buckets, and carry them to the well. # (Note that the larger is the 7-gallon bucket, and the smaller is the 4-gallon bucket.) # Fill the 4-gallon bucket with water to the top. # Empty all the water from the 4-gallon bucket into the 7-gallon bucket. # (Note that there is room in the 7-gallon bucket for exactly 3 more gallons.) # Fill the 4-gallon bucket again. # Pour from the 4-gallon bucket into the 7-gallon bucket all the water that will fit, spilling none. # (Note that since there was room for only 3 more gallons in the 7-gallon bucket, you now have 1 gallon left in the 4-gallon bucket.) # Dump out all the water from the 7-gallon bucket. (Pour it back into the well or onto some flowers so it's not wasted.) # Pour the 1 gallon of water that remains in the 4-gallon bucket into the empty 7-gallon bucket. # Refill the 4-gallon bucket completely. # Pour all the 4 gallons from the 4-gallon bucket into the 7-gallon bucket. # (Note that since the 7-gallon bucket had 1 gallon already and you added 4 gallons, you now have 5 gallons of water in the 7-gallon bucket!) # Bring back your 7-gallon bucket that's holding exactly 5 gallons of water. (Bring your 4-gallon bucket back too, in case you want to play again!)
How do you know when your water well is empty?
When nothing comes out.
