0
What else can I help you with?
The coarse adjustment knob on a microscope should never be used with the?
The coarse adjustment knob on a microscope should never be used with the high-power objective lens. This can cause damage to both the lens and the slide being viewed. Instead, it is best used with the low-power or scanning objective lens for initial focusing.
What part of the microscope should you used to focus the image when using high power objective lens?
First of all, one should never call it high power, it is morecommonly called the "high objective", yet that is not what this question is asking. To answer the question: You use the fine adjustment knob. This knob should be located near the coarse adjustment knob, on the opposite side of the microscope (at the same height as the coarse adjustment knob), or even as a separate knob protruding from the coarse adjustment knob. The fine adjustment knob is smaller in size. You should never, ever use the coarse adjustment knob under the high objective, you could scratch the microscope slide, cover slip, high objective lens, or in a worst case scenario break the high objective lens.
What happens if you turn the coase adjustment knob while using the low power objective?
Nothing will happen because the coarse adjustment knob controls the position of the stage of the microscope, which is used to focus the specimen. This adjustment is independent of the choice of objective lens.
Which objective should the coarse focus knob be used?
The coarse adjustment knob is only used with the low-power objective lens (usually 4x) because all the other ones are too long and the coarse adjustment knob may bring the slide up too qucikly, therefore it might break the slide or crush the specimen being observed. When using the medium (10x) and high (40x) power objective lens, it is best to use the fine adjustment knob to focus on the details instead.
Which part of a light microscope would most likely be damaged if the coarse adjustment is improperly used while a specimen is being observed under high power?
The coarse adjustment knob controls the stage's vertical position in relation to the objective lenses. If improperly used under high power, it can damage the objective lens or the slide due to the rapid movement.
Why should you never use the coarse adjustment knob on high power for a microscope?
Using the coarse adjustment knob on high power can potentially damage the microscope or the slide being observed due to the high magnification and close proximity of the objective lens to the slide. It is better to make coarse adjustments on low power to avoid hitting the objective lens against the slide.
Why is coarse adjustment knob not commonly used when focusing under high power objective?
The coarse adjustment knob moves the objective a lot while the fine adjustment knob moves it just a little, so using the coarse knob under high power can cause the objective to hit the slide and potentially damage the slide or the objective. The fine adjustment knob provides more precise control for focusing under high power, allowing for better clarity and accuracy.
The coarse adjustment knob on a microscope should never be used with the?
The coarse adjustment knob on a microscope should never be used with the high-power objective lens. This can cause damage to both the lens and the slide being viewed. Instead, it is best used with the low-power or scanning objective lens for initial focusing.
6 How does the procedure for using the microscope differ under high power?
For low power you can use the coarse adjustment and fine adjustment for high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
What is the name of the adjustment knob that moves the body tube for focusing with the high-power objective lens?
The adjustment knob that moves the body tube for focusing with the high-power objective lens is called the fine focus adjustment knob. It allows for precise adjustments to bring the specimen into sharp focus at high magnifications.
Which part of a microscope should be used with the low power objective but not with the high power objective?
The coarse focus knob should be used with the low power objective but not with the high power objective. The point of using the coarse focus knob is to bring the specimen into general focus before fine-tuning with the high power objective, which requires more precise adjustments.
How does the procedure for using the microscope differ under high power as opposed to low power?
use the fine adjustment knob to get a better view of what you are looking at.For low power you can use the coarse adjustment and fine adjustmentfor high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
How does the procedure for using the microscope different under high power as oppose to low power?
use the fine adjustment knob to get a better view of what you are looking at.For low power you can use the coarse adjustment and fine adjustmentfor high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
What is the use of the coarse adjustment knob?
The course adjustment moves the stage of the microscope further/closer away from the objective lens (it is used for general focusing), and the fine adjustment moves the objective lens very small distances for finer focusing.
What part of the microscope should you used to focus the image when using high power objective lens?
First of all, one should never call it high power, it is morecommonly called the "high objective", yet that is not what this question is asking. To answer the question: You use the fine adjustment knob. This knob should be located near the coarse adjustment knob, on the opposite side of the microscope (at the same height as the coarse adjustment knob), or even as a separate knob protruding from the coarse adjustment knob. The fine adjustment knob is smaller in size. You should never, ever use the coarse adjustment knob under the high objective, you could scratch the microscope slide, cover slip, high objective lens, or in a worst case scenario break the high objective lens.
If you use the coarse-adjustment knob to focus on an object with the high-power objective what problems will you encounter why?
Using the coarse-adjustment knob with the high-power objective can result in the objective lens getting too close to the slide, potentially damaging the lens or slide. This can also lead to the objective lens hitting the slide, causing a loss of focus and potential damage to both the lens and the slide.
What happens if you turn the coase adjustment knob while using the low power objective?
Nothing will happen because the coarse adjustment knob controls the position of the stage of the microscope, which is used to focus the specimen. This adjustment is independent of the choice of objective lens.
