0
There is no such thing as a white LED.
You produce white light from LEDs by combining red, green and blue LEDs.
Red LEDs were produced first because red is a low frequency of light. It was the easiest to make.
Green LEDs were produced next because green is a higher frequency of light. It was harder to make.
By combining red and green LEDs, you can produce yellow light.
Blue is a very high frequency of light and is very hard to produce. Blue LEDs and blue lasers (as in BluRay) took a great deal of effort to create. LED technology and some kinds of laser technology are very closely related.
What else can I help you with?
Where are LED's are used commonly?
LEDs are commonly used in a variety of applications, including residential and commercial lighting, automotive headlights, and electronic displays such as televisions and computer screens. They are also found in traffic signals, streetlights, and decorative lighting due to their energy efficiency and long lifespan. Additionally, LEDs are utilized in backlighting for devices like smartphones and tablets, as well as in signage and indicator lights. Their versatility and low energy consumption make them a popular choice across many industries.
Where do you bump into Gallium in every day life?
Gallium is not commonly found in everyday life, but it's used in some electronics like LEDs and integrated circuits. It's also sometimes used in thermal management applications due to its unique properties, such as its low melting point.
What color streak does ruby make?
'White. If you crush it, it will produce white white pouder
How long do white skulls last on tibia?
If u only attacked a person in Tibia, it will last as long as the Logout/Protection Zone block, which is usually 60 seconds, but you have to be in no fight or any kind of agression in these 60 seconds to make the white skull go away. If you kill a person it will last 15 minutes no matter what.
What do the colors of the rainbow make?
The colors of the rainbow combine to make white light. Each color has a different wavelength, and when they are all combined, they create the full spectrum of colors that make up white light.
What color LEDs in Gallium used to make?
Gallium nitride (GaN) LEDs are commonly used to create blue LEDs. By combining a blue LED with a yellow phosphor coating or a green and red LED, white light can be produced. Additionally, different additives can be incorporated to create other colors such as red, green, and yellow LEDs.
You own Lexus SC400 1993 and you have no lights on neither one of the needles on the dashboard What could be wrong?
There are leds in the needles that no longer make contact. When the temperature changes they might lit up temorarilly. I 'fixed' mine by putting 3 clusters of four leds in each long needle and 2 clusters of four in the short ones. When you put four leds in serie you do't need a resistor. The original leds are hard to remove. Since the weight of new leds is different, callibration with little weights is required. Other solutions I saw: -using fluorescent paint and adding a light in the background.
How can you make LEDs dim to your music when the bass hits?
Plug into speaker jacks
What can you make with plain white paper and glitter and glue?
Figure out how to make an origami hat using the white paper. Then, when your done making the hat, use the glue to add glitter to the places you want it.
Make a list of the uses for leds?
LEDs are used in traffic lights, on computer lights, car lights and indicators. You can also purchase LED flashlights and torches. Can be used in small devices for a variety of uses.
What primary colors make white?
it is possible, you can use the color red, blue, and yellow with a certain amount of that color, (there is over 1 million possible combinations to try and figure out how to make white.) after this is done you can possibly end up with white.
How long did it take Google to begin to make a profit?
I don't know, Figure it out yourself
How do you solder fly leads to LEDs?
Use a heat sink. Many LEDs are heat sensitive. I make a heat sink by putting a rubber band round the handles of a small pair of snipe nosed pliers.
How can you make LEGO Halo?
You can get a normal lego figure paint it white then make halo armor and add a lego alien police helmet (blue one with adu on it) and then paint that white and paint a halo helmet
Where do you get LEDs for the window and lock controls for a Chevy Trailblazer?
home depo, sears, wal*mart. If they are indeed LEDs (Light Emitting Diodes) then any radio shack (or similar) will carry them. Make sure they are LEDs and not just 12Vdc incandescent bulbs. They are probably integrated into a circuit board, but can be replaced by using a soldering iron.
How do you make jawbone discoverable?
Press both buttons on the Jawbone for a few seconds until the LEDs flash alternating red/white. It should be in Discover mode at this point. Enter the correct passkey (Generally 0000, it's no secret). That's about it!
What colors make pale pink?
figure it out urself
