The purpose of a lamp is to light up a small area.
Typically, if the ballast on a fluorescent light blows, the lamp will not work. The ballast regulates the electrical current to the lamp, so if it is not functioning properly, the lamp will not receive the correct power to light up.
If an insulator with a lamp is connected in an electrical circuit and the switch is turned on, the lamp will not light up. Insulators do not allow the flow of electric current, so the circuit will not be completed, and no electricity will reach the lamp to cause it to light up.
Mostly heat, but that heat causes a filament to glow, which makes light.
PL is mean Plug in - Light Bulb, the most comment application is CFL (Compact Fluorescent Lamp) which require assistance components to make it work or light it up, different to incandescent light bulb, it can light up by just itself direct connect to our home electricity ac 100v to ac 240v.
The light frequency from an incandescent lamp depends on the temperature of the filament. As the filament heats up, it emits a broad spectrum of light that includes all visible frequencies.
to light the room up
light
to light the room up
Typically, if the ballast on a fluorescent light blows, the lamp will not work. The ballast regulates the electrical current to the lamp, so if it is not functioning properly, the lamp will not receive the correct power to light up.
get a match somewhere!
mains plug
mains plug
Both are acceptable with different meaning. I read by the light of the lamp means I use the lamp to light the pages so that I can read them. I saw it in the light of the lamp means it was visible in that pool of light caused by the lamp.
If the filament inside a lamp is broken, it cannot conduct electricity properly, which is essential for generating light. The broken filament creates a gap in the circuit, preventing the flow of electricity needed to produce light. As a result, the lamp will not light up.
It's in Golden Harbor You need to light the lamps in a specific order to get the Map piece. You need to light the first, second, and fourth lamps. Count the lamps and then do this. Light the fourth lamp first, which is right next to the gate. Then you need to light up second lamp, which is on the first building. And then the first lamp which is the first lamp you see when you come there first. If you light them up in this order, the map piece will come out of the gate the fourth lamp is next to.
The potato lamp works because the acid in the potato lights up the light bulb.
If an insulator with a lamp is connected in an electrical circuit and the switch is turned on, the lamp will not light up. Insulators do not allow the flow of electric current, so the circuit will not be completed, and no electricity will reach the lamp to cause it to light up.