Because the knob is originally threaded, like a screw, which is how you attach the knob to the lamp. It is threaded clockwise, so that as you turn the knob in that direction, you don't unscrew the knob. On some lamps, turning it the other way removes the knob.
To regulate the burner flame on a stove, adjust the gas flow using the burner control knob. Turn the knob clockwise to increase the flame size and counterclockwise to decrease it. Monitor the flame as you make adjustments to ensure it is at the desired level for cooking.
To turn off a Bunsen burner, first close the air hole at the base of the burner by turning the metal collar clockwise until it's fully closed. Then turn the gas knob on the burner clockwise until it stops to shut off the gas supply. Let the burner cool down before handling it.
The piece that screws the lamp shade onto the lamp is called a finial. It is typically a decorative knob that screws onto the lamp's harp to secure the shade in place.
The knob may break.
The coarse adjustment knob should be moved in a counterclockwise direction to raise the body tube.
The purpose of the lamp knob is to control the brightness of the light emitted by the lamp. It functions by adjusting the flow of electricity to the light bulb, which in turn regulates the amount of light produced. Turning the knob clockwise increases the brightness, while turning it counterclockwise decreases the brightness.
In imperative sentences the subject is always the understood "you."
Simply grab the knob, and turn it counter-clockwise while gripping it tightly.
On a round valve handle you normally turn it clockwise to close .
Pretty simple, there is a black turn knob at the bottom of the shifter, just turn this knob counter-clockwise to loosen, then you pull the shifter knob straight up and off.
Turn the lights on, all the way to the right and Pull the knob.
move the light knob counterclockwise and clockwise fastly
infinitydecor.co.uk/product/ball-door-knob-polished-brass/
Make Model Year??? If its a jeep it is probably on the pull knob for the headlights, just turn clockwise or counter clockwise... don't force it, if it doesn't turn its not there... Owners manual????
To adjust the brightness of your lamp using a lamp dimmer, simply turn the knob or slide the switch on the dimmer to increase or decrease the light output.
turn counter - clockwise, if it does not apear to be "threaded" just pull it off.
Grab the Pastic ring at the bottom of the shift knob. Push down to release the boot. the turn knob counter-clockwise until off.