0
What else can I help you with?
How would you wrap a piece of paper around a cylinder whose base diameter is smaller than its top diameter keeping the paper flush against the cylinder?
To wrap a piece of paper around a cylinder with a base diameter smaller than its top diameter and keep the paper flush against the cylinder, you can make a slit along one side of the paper from the edge to the center. Then, overlap the edges of the cut and tape or glue them to create a conical shape that matches the slant of the cylinder. This will allow you to wrap the paper smoothly around the cylinder.
How do you make a paper clip float?
if you want to make it float follow this steps 1. cut a small piece of paper 2.take a paperclip and attached it to the paper 3.carefully place the paper on the water trying not to get water on top of the paper there you have it a floating paperclip
What does a g clamp look like?
its a piece of curved metal with another piece of metal going through it at the top
Why stop paper chromatography from reaching the top of the paper?
The end of the paper nearest the spot is allowed to be in contact with a suitable solvent, WITHOUT immersing the spot itself. If the spots were immersed they would dissolve in the solvent and be pulled down into the solvent itself.
Some components of ink are minimally attracted to the stationary phase and very soluble in the solvent Where are these components located on the filter paper during chromatography?
These components would travel the farthest up the filter paper in chromatography because they are less attracted to the paper and more attracted to the solvent. They are likely to be found closer to the top of the paper where the solvent front has reached.
Why does a peice of paper rise as you blow over it?
When you blow - you're moving the air that was static over the top of the paper. This lowers the air pressure relative to the air underneath, so it pushes upwards on the piece of paper.
Why does a piece of paper bend as you blow under?
When you blow under a piece of paper, the air flow creates a low-pressure area under the paper, causing it to bend towards the side with higher pressure (usually the top side). The pressure difference between the top and bottom of the paper results in a lifting force that causes the paper to bend.
Why a sheet of paper rises when you blow air above the tissue paper?
When you blow air above a sheet of paper, you create a region of low pressure due to the fast-moving air. This lower pressure above the paper creates a pressure difference between the top and bottom of the paper, causing the paper to be pushed upwards by the higher air pressure below it. This lift force causes the paper to rise.
Why does the paper get blown off when you blow under it?
When you blow air under a piece of paper, the air pressure beneath the paper decreases, creating a difference in pressure between the top and bottom surfaces. The higher atmospheric pressure on top pushes down on the paper, while the lower pressure underneath causes the paper to lift and be blown away. This phenomenon is a demonstration of Bernoulli's principle, where faster-moving air results in lower pressure.
Why does a piece of paper rise as you blow air across it?
Answer To put it simply, by blowing across the piece of paper you are creating low pressure. This is the same way that an airplane wing works. Except on an air craft air is forced underneath the wing to create lox pressure underneath it creating an upwards force called lift which pushes the air craft up. The piece of paper is so light that the low pressure that you are creating over the top of it makes the paper rise toward it. The same thing happens with your shower curtain in the shower sometimes. Did you ever wonder why the shower curtain closes in on you while in the shower? Well now you know. EDIT! - The above answer is the common explanation but it is incorrect. The paper lifts because the airflow sticks to the paper and is directed downward - forcing the paper upward. For the above explanation to be true you should be able to hold a piece of paper horizontally and make it lift by blowing across it - but it doesn't.
What is the different between landscape and portraitprinting?
Think of an A4 piece of paper... Landscape is the piece of paper laid with its longest side top & bottom (like a letter-box). Portrait is the piece of paper 'stood' on its shortest side.
How many sides does a piece of paper have?
a piece of paper is a 3D object it has a front and back face + two side edges + a top and bottom edge = 6 sides a piece of paper has 6 sides
Were is the other half of a piece of paper of club penguin?
On top of the night club
How do you make a spd paper morpher?
To make a simple SPD (specially designed paper) morpher, start by cutting a piece of paper into a rectangular shape, typically around 8.5 by 11 inches. Fold the paper in half lengthwise, then unfold and fold the top corners down to the center fold to create a triangular flap. Next, fold the bottom of the paper upwards, leaving some space at the top for the morphing effect. Decorate your morpher with designs or colors, and manipulate the folds to create different shapes or characters as desired.
Where is the piece of paper on club penguin for operation spy week?
the answer is the flag at the forts and the nite club sign.
Can a light bulb start a fire when a piece of paper is added to the top?
Of Course! xD
Where is the piece of comic in side the school?
on the ladder thing go to the top and get the paper that's flying
