0
The reset is a high limit safety device that cuts the voltage off when the temperature of the water tank becomes too high. If you feel that the water temperature is hotter that usual this is a good sign that the thermostat is not working. Check and make sure that the setting of the thermostat has not been altered. It should be set for around 140F. If the setting has not been adjusted then there is a good chance that the thermostat needs replacing
What else can I help you with?
Why does hot grease pop when mixed with water?
It pops because the grease's temperature is hotter then the water or food supply that your are examining by the grease being really hot the cooler temperature of the substance causes the grease to pop and crackle
Will soap dissolve faster in water or pop?
Hot water will dissolve soap faster because it is more hot so that means it will melt is and also evaporate with the water.
Why do bubbles pop when touched by something hot?
Bubbles pop when touched by something hot because the heat causes the water inside the bubble to evaporate rapidly, weakening the surface tension of the bubble. This leads to the bubble bursting and the water vaporizing into the air.
In soda pop the solvent would be the?
In soda pop, the solvent would be the water. In a solution, the substance that is being dissolved in the solute.
What gas burns with a pop in lime water?
Carbon dioxide gas burns with a pop in lime water. When carbon dioxide gas is passed through lime water, it forms a milky precipitate of calcium carbonate, resulting in the pop sound due to the chemical reaction.
What will happen to a balloon if you hold it under hot water or over a heater?
Hot water, nothing aside from getting wet. Boiling water might pop it but it's doubtful. Plus you'd have to subject your hand to boiling water which isn't safe.A heater, also nothing unless it touches the heating element & if it's hot enough it'll pop.
What is the purpose of a pop off valve for a hot water heater and how does it function to ensure safety and prevent potential hazards?
The purpose of a pop off valve for a hot water heater is to release excess pressure that builds up inside the tank, preventing it from exploding. The valve functions by opening when the pressure exceeds a safe level, allowing the hot water to escape harmlessly. This helps to ensure safety by preventing the tank from rupturing and causing potential hazards like scalding water or fires.
If you fill a balloon with hot and cold water and dropped them which one will pop first?
hot balloon will pop first
Why is my water heater pop off valve leaking and how can I fix it?
The water heater pop off valve may be leaking due to high pressure or temperature in the tank. To fix it, you can try lowering the temperature setting on the water heater or replacing the valve if it is faulty. It is important to address this issue promptly to prevent potential damage or safety hazards.
Why should you not pour very hot water into a drinking glass?
because the glass will pop if you put the very hot water into the glass
How long does it take for a balloon filled with hot water to pop?
The time it takes for a balloon filled with hot water to pop can vary depending on factors such as the temperature of the water, the material and thickness of the balloon, and the surrounding environment. Generally, a balloon filled with hot water can pop within a few seconds to a few minutes as the heat weakens the structure of the balloon.
Why does hot grease pop when mixed with water?
It pops because the grease's temperature is hotter then the water or food supply that your are examining by the grease being really hot the cooler temperature of the substance causes the grease to pop and crackle
How do you get your hot water boiler to work if it is vapor locked?
Open the pop off valve on the top and see if air releases. If this does not work may need to replace water heater. This is very dangerous and can explode if the pressure builds to high!!! How do you know it's vapor locked?
What is the purpose of a water heater popoff valve and how does it function to ensure the safety of the water heater system?
The purpose of a water heater pop-off valve is to release excess pressure in the water heater system to prevent explosions or damage. It functions by opening when the pressure inside the tank exceeds a safe level, allowing the excess pressure to escape and reducing the risk of a dangerous buildup. This helps ensure the safety of the water heater system by preventing potential hazards.
How do you get a Popsicle out of a ice pop maker?
Dip it briefly in hot water and out they'll come.
Why can a dented table tennis ball often be mended by warming it in a hot water?
The hot water heats the air inside the ball, which expands and forces the dent to pop out.
Will soap dissolve faster in water or pop?
Hot water will dissolve soap faster because it is more hot so that means it will melt is and also evaporate with the water.
