answersLogoWhite

0

The sensing unit on the fixture is thinking that it is night time. If your fixture has a switch before the light, that has to be left on for the sensor to work, try the following. Turn the fixture off with the switch and leave it off for about ten minutes. Turn the switch back on and the fixture will turn on. If the sensor circuitry is working the fixture will turn off after your "delay on" setting is reached.

If there is no switch before the fixture check to see if the sensor has been covered, fooling the sensor into thinking it is night time. If it is a hollow tube type sensor, sometimes hornets will lay an egg in there and cover the sensor with a mud patch.

As a last resort change the sensitivity control so that is senses daylight sooner, allowing the sensor to shut off earlier. If none of the above work its time to buy a new sensor. These can be bought individually and installed into the old fixture.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Natural Sciences

What is the reason of daylight saving?

Daylight saving time was originally implemented to save energy and make better use of daylight during the longer days of summer. By moving the clocks forward in the spring, people could take advantage of the natural light and reduce the need for artificial lighting in the evenings.


What is the reason behind daylight savings time?

* Daylight Saving Time saves energy. Based on consumption figures for 1974 and 1975, The Department of Transportation says observing Daylight Saving Time in March and April saved the equivalent in energy of 10,000 barrels of oil each day -- a total of 600,000 barrels in each of those two years. California Energy Commission studies confirm a saving of about one percent per day. * Daylight Saving Time saves lives and prevents traffic injuries. The earlier Daylight Saving Time allowed more people to travel home from work and school in daylight, which is much safer than darkness. And except for the months of November through February, Daylight Saving Time does not increase the morning hazard for those going to school and work. * Daylight Saving Time prevents crime. Because people get home from work and school and complete more errands and chores in daylight, Daylight Saving Time also seems to reduce people's exposure to various crimes, which are more common in darkness than in light. www.standardtime.com


Name of locations in the US who choose not to do daylight saving time?

Arizona and Hawaii do not have Day light saving. http://www.time.gov/


Why does daylight savings happen?

Daylight Saving Time (or summertime as it is called in many countries) is a way of getting more light out of the day by advancing clocks by one hour during the summer. During Daylight Saving Time, the sun appears to rise one hour later in the morning, when people are usually asleep anyway, and sets one hour later in the evening, seeming to stretch the day longer


Why was daylight saving time invented?

Daylight saving time was invented to make better use of daylight during the longer days of spring and summer, and to reduce energy consumption by having more activity during daylight hours. It aims to align human activities more closely with the natural light cycle.

Related Questions

How do people benefit from daylight saving time?

I Hear When It first Started It was To Get More From The suns Light To Use Less Energy For $$$$ Reasons...


Can you use an energy saving light bulb in a light fitting with a light sensor?

yes as long as the sockets match up and it is not a high output light fixture


What is the reason of daylight saving?

Daylight saving time was originally implemented to save energy and make better use of daylight during the longer days of summer. By moving the clocks forward in the spring, people could take advantage of the natural light and reduce the need for artificial lighting in the evenings.


Why do you still have daylight saving?

For farmers to have more light to work


What do I do with a clock with old daylight saving time?

wait till day light saving ends wait till day light saving ends


How does daylight saving work?

Daylight saving time saves light. You turn your clocks an hour ahead in spring and set them an hour back in fall.


Can you use an energy saving light bulb in a fitting with dusk to dawn sensor?

Yes, you can use an energy saving light bulb in a fitting with a dusk to dawn sensor. Energy saving bulbs are compatible with most types of light fixtures, including those with sensors. Just make sure the bulb is suitable for outdoor use if the fitting is located outside.


What is the reason behind daylight savings time?

* Daylight Saving Time saves energy. Based on consumption figures for 1974 and 1975, The Department of Transportation says observing Daylight Saving Time in March and April saved the equivalent in energy of 10,000 barrels of oil each day -- a total of 600,000 barrels in each of those two years. California Energy Commission studies confirm a saving of about one percent per day. * Daylight Saving Time saves lives and prevents traffic injuries. The earlier Daylight Saving Time allowed more people to travel home from work and school in daylight, which is much safer than darkness. And except for the months of November through February, Daylight Saving Time does not increase the morning hazard for those going to school and work. * Daylight Saving Time prevents crime. Because people get home from work and school and complete more errands and chores in daylight, Daylight Saving Time also seems to reduce people's exposure to various crimes, which are more common in darkness than in light. www.standardtime.com


Name of locations in the US who choose not to do daylight saving time?

Arizona and Hawaii do not have Day light saving. http://www.time.gov/


Why does daylight savings happen?

Daylight Saving Time (or summertime as it is called in many countries) is a way of getting more light out of the day by advancing clocks by one hour during the summer. During Daylight Saving Time, the sun appears to rise one hour later in the morning, when people are usually asleep anyway, and sets one hour later in the evening, seeming to stretch the day longer


Daylight driving lights stay on when it is light out?

Dirty/faulty dawn/dusk light sensor


Why was daylight saving time invented?

Daylight saving time was invented to make better use of daylight during the longer days of spring and summer, and to reduce energy consumption by having more activity during daylight hours. It aims to align human activities more closely with the natural light cycle.