The metal with lowest M.P is Hg (Mercury).
You think probable to a glass.
The melting point of glass rods can vary depending on the composition of the glass. However, most common types of glass rods have a melting point between 1300°C and 1500°C (2372°F to 2732°F).
it has a low melting point
The melting point of copper is 1084,62 0C. Diamond burn on heating in air; under pressure of a inert gas the melting point may be approx. 4 000 0C. This depends on the type of glass; also glass hasn't a true melting point. Glasses are melted over 400 0C.
Bonded glass is a way to seal materials with an intermediate glass layer. It is used for micro machined structures and uses low melting glass.
Low melting point glass, also known as soft glass, has properties such as easy malleability and transparency. It is commonly used in glassblowing, art glass, and scientific glassware due to its ability to be shaped at lower temperatures. Its applications include creating intricate glass sculptures, laboratory equipment, and decorative glass objects.
The metal with lowest M.P is Hg (Mercury).
The melting point of the mold must be higher than the temperature at which glass gets soft to prevent the mold from deforming or melting during the glass forming process. If the mold temperature is too low, it may not be able to maintain its shape when hot glass is introduced, leading to a defective final product.
You think probable to a glass.
Its High boiling pointIts low melting pointIt does not stick any glass
The making of soda lime glass is expensive to compare then recycle sodalime glass . Main component for making soda lime glass is silica. for melting silica required toomuch temperature & other component which soda lime glass required are also much expansive. but recycled soda lime glass required low temperature for melting to shape it again at low cost . so we recycle soda lime glass. (mahesharma@rocketmail.com)
Yes, its 1,948 degrees fahrenheit and 1,064 degrees celcius
glass
The melting point of the mold must be higher than the melting point of glass, or else it would not be able to hold the soft glass in the correct shape.
Naphthalene has a relatively low melting point of around 80 degrees Celsius.
The melting point of the mold must be higher than the melting point of glass, or else it would not be able to hold the soft glass in the correct shape.