0
For a copper wire to melt it would have to reach a temperature of 1083 degrees C.For an aluminium wire to melt it would have to reach a temperature of 658 degrees C.
So as you can see at these temperatures there would not be much left of the device's conductors that were needed for its operation . It is for this reason that conductors are protected by overload and over current devices to break the current flow before these temperatures can be reached.
What else can I help you with?
If you wire a plug in reverse by mistke with the hot lead on the thick side of the polarized plug will it cause a problem?
Yes, wiring a plug in reverse with the hot lead on the wrong side can cause a problem. It can create a risk of electric shock and damage to electrical devices because it disrupts the intended flow of electricity through the plug. It is important to always follow proper wiring instructions to avoid such issues.
In an electric kettle water becomes hot by?
In an electric kettle, water becomes hot by using a heating element that heats up when the kettle is turned on. The heating element transfers heat to the water, raising its temperature until it reaches boiling point.
Is a plug socket not live until all 3 prongs are in?
No. A plug has a Hot side and is always live assuming your breaker/fuse is installed and working how it's supposed to. You can get electrocuted by touching the hot side and grounding out, either through the ground part of the plug or by being grounded by touching something that connects you to the earth.
What are the designations of a three-prong plug?
The designations of a three-prong plug are typically "hot," "neutral," and "ground." The hot wire carries the electrical current, the neutral wire completes the circuit, and the ground wire provides a path to the ground in case of a fault to prevent electric shock.
What can you do to stop the plug on your electric heating from getting red hot?
You must have some high resistance in the plug or outlet, make sure that all connections are clean and tight, clean off any corrosion or burns on the plug, may have to replace outlet if contacts are burned in outlet. This is a fire hazard.
What are 3 wires in a plug socket called?
Hot, neutral and ground.
Why does in an electric plug only live pin heat up?
A correctly-loaded plug should not heat up at all. If one (rather than both) pin is hot, then it probably indicates a poor connection into the socket (receptacle).
Why solar panels work well in jersey channel islands?
BECAUSE THEY ARE THE NEW Micro inverter type....Which are installed by a company called Free Hot Water Spain. They install electric making solar panels. The panels have a Plug on and plug into your house, in a normal plug socket.
If you wire a plug in reverse by mistke with the hot lead on the thick side of the polarized plug will it cause a problem?
Yes, wiring a plug in reverse with the hot lead on the wrong side can cause a problem. It can create a risk of electric shock and damage to electrical devices because it disrupts the intended flow of electricity through the plug. It is important to always follow proper wiring instructions to avoid such issues.
How do you charge tai chi electric hot water bag?
plug it
What is an electric skillet?
It is a frying pan with a built-in electric heating element. You plug it in and the pan gets hot enough to cook with.
How does electric stove works?
Electric Stoves Work in a weird way. When you plug it in a sends a signal to the mainframe. which causes an electric volt that hits the metal causing it to get hot.
What is the definition of hot wire in electricity?
A hot wire in electricity refers to a wire that carries an electric current and becomes hot due to the flow of electricity through it.
In an electric kettle water becomes hot by?
In an electric kettle, water becomes hot by using a heating element that heats up when the kettle is turned on. The heating element transfers heat to the water, raising its temperature until it reaches boiling point.
Is a plug socket not live until all 3 prongs are in?
No. A plug has a Hot side and is always live assuming your breaker/fuse is installed and working how it's supposed to. You can get electrocuted by touching the hot side and grounding out, either through the ground part of the plug or by being grounded by touching something that connects you to the earth.
Where is the small black round tap feeding the hot water tank?
Hot water tank? On a water heater tank there is always a extra black plug in case you need to change your way of installing the pipes to it. The plug on most electric water heaters are opposite of your PRV valve (pressure relief valve) so if your PRV valve is on top then your plug will be on the side and if your PRV is on the side then your plug will be on top of the water heater if its electric.
Why does a wire carrying electric current become hot?
A wire carrying electric current becomes hot due to the resistance in the wire. As the electric current flows through the wire, the resistance causes some of the electrical energy to be converted into heat energy, which raises the temperature of the wire.
