answersLogoWhite

0

Some times it is the wind that sets them off. I have trees that are close to the house that the sensor is pointed directly at. When the wind blows they trip the motion detector. If the sensitivity is turned up to the top it will pick up small animals. To set this sensitivity do a walk test at night. Get someone to walk past as you turn the sensitivity down. When the sensitivity is down so as not to pick the subject up give it a 1/4 turn to the plus side and that should stop needless tripping.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Natural Sciences

If you have two exterior lights on a switch and need one of them to be a motion censer?

There are two ways to do it. The easiest is just to put a built-in motion sensor on the one light. The switch would have to be on for the motion sensor to work. If you just want the motion sensor to work without a switch, you need to run unswitched power directly to the light.


Eml e100 manual This is an outdoor motion sensor light. I need to know how to keep it off during daylight.?

To keep the Eml e100 manual outdoor motion sensor light off during daylight, you will need to adjust the sensitivity settings or the timer settings on the device. Most motion sensor lights have a sensitivity adjustment dial or switch that allows you to control when the light turns on based on the amount of ambient light. Consult the user manual for specific instructions on how to adjust these settings to prevent the light from turning on during daylight hours.


Is motion sensor can detect in very dark area?

Most motion sensors rely on detecting changes in infrared energy to sense movement, and they may struggle in very dark areas. However, there are some motion sensors equipped with infrared illuminators that can detect motion even in complete darkness. These sensors use their own source of infrared light to illuminate the area and detect movement.


A body in motion tends to stay in motion due to it what?

A body in motion tends to stay in motion due to its inertia, which is the resistance of an object to change its state of motion. This concept is one of Newton's laws of motion and applies to objects that are moving or stationary.


Why doesn't a car in motion on a flat road stay in motion?

Because of friction.

Related Questions

Why does motion sensor can't detect in very dark area?

Because motion sensors sense the movement of light, so if its dark, it cant see.


How can I make a motion sensor light stay on continuously?

To make a motion sensor light stay on continuously, you can usually override the sensor by flipping the switch on and off quickly. This will keep the light on until you manually turn it off again. Keep in mind that this may vary depending on the specific model of the motion sensor light.


How can you trick a motion sensor to stay on longer than its programmed duration?

One way to trick a motion sensor to stay on longer than its programmed duration is to continuously move within its detection range, which can reset the timer and keep the sensor activated.


Why when it rains your motion lights stay on?

Rain can interfere with the motion sensor's ability to detect motion accurately. Droplets of water can trigger false positives by reflecting light or by setting off the sensor when they break the sensor's infrared beam. This can cause the motion lights to stay on during rainy conditions.


Why do motion detector lights stay on?

Motion detector lights may stay on due to various reasons such as sensitivity settings, environmental factors like wind or animals triggering the sensor, or a malfunction in the sensor itself.


Why does your motion sensor security light stay on all night?

Either the sensor is not working properly or you have enough motion such as trees swaying, etc. to cause the sensors to constantly activate the lights.


What are the benefits of installing a motion sensor flood light in your outdoor space?

Installing a motion sensor flood light in your outdoor space can enhance security by deterring intruders, increase safety by illuminating dark areas, and save energy by only turning on when motion is detected.


Why does the motion light stay on?

The motion light stays on because it is detecting movement within its sensor range, which triggers it to remain illuminated for a set period of time.


Motion to stay?

what is motion to stay


Does HCL ME X1 Tablet have motion sensor?

yes ! yes ! it has..... G sensor i.e the motion sensor.


How can I make a motion sensor light stay on?

To make a motion sensor light stay on, you can adjust the settings on the light itself or use a separate switch to override the motion sensor. Some lights have a "dusk-to-dawn" mode that keeps them on continuously, while others may have a manual override feature that allows you to control when the light stays on. If your light does not have these options, you may need to consult the manufacturer's instructions or consider installing a separate switch to keep the light on when needed.


How can I turn off motion sensor lights?

To turn off motion sensor lights, locate the switch or button that controls the motion sensor function and toggle it to the off position. This will deactivate the motion sensor and keep the lights from turning on automatically.