When you spin a bottle of water, the centrifugal force causes the water to rotate along with the bottle. This rotation creates a vortex in the water, causing it to rise up the sides of the bottle towards the top. If spun fast enough, the water may even create a whirlpool effect inside the bottle.
Putting water in a fog machine can damage it or cause it to malfunction. Fog machines are designed to work with fog fluid, which is a specific type of liquid that gets vaporized to produce fog. Water may not produce the desired fog effect and can clog the machine's components. Always use the recommended fog fluid for your fog machine.
Warm water has more fog due to great humidity
Fog is a mixture of water and air, which is itself a mixture..
water
with less water in it
If you take hot water and put it in a bottle some of the water will vaporize into the air and then due to the colder environment around the bottle condense against the bottle walls leaving the "fog" effect on the edges. What your actually seeing is tiny water droplets on the side of the bottle.
alcohol is basicall condensation it causes fog just like hot and or cold water
Make fog in a bottle with hot waterIn this case the condensation is caused by the temperature variation between simple ice and hot water. 1. Fill up the jar or bottle completely with very hot water and let it stay there for about 60 seconds. 2. Pour out all but about an inch of the hot water. 3. Put a strainer or bag over the top of the jar. 4. Place ice cubes in the strainer or plastic bag. 5. Fog will form as the hot water vapor from the bottom of the bottle contacts the cold air created by the ice cubes and begins condensation.and there ya go. hehe
Steam fog is fog that that comes off of water. It comes up when it is really ht outside.
water goggles fog up by condensation when the heat is in your goggles its trapped and the plastic probably absorbs the cold in the water
Convection in a hot water bottle is the transfer of heat through the movement of the water inside the bottle as it heats up. Conduction is the transfer of heat through direct contact between the hot water in the bottle and the material of the bottle itself. Together, convection and conduction work to warm up the contents of the hot water bottle.
Fog shows up when water vapor, or water in its gaseous form, condenses. During condensation, molecules of water vapor combine to make tiny liquid water droplets that hang in the air. You can see fog because of these tiny water droplets.
No, a toothpick is not strong enough to hold up a water bottle. Water bottles are too heavy for a toothpick to support.
Bubbles in your water bottle are likely caused by air getting trapped in the water when you fill it up or by carbonation in the water.
You get a empty water bottle, fill it up with hot water into the bottle and apply it to that area.
Pure substances are those that are composed of only one element or compound. Fog is made up of water, along with the various elements and compounds that make up the Earth's atmosphere. Therefore, fog is not a pure substance.