i think the answer is that {it is my own thinking answer}
when light enter from air to water it bent because it want follow a principle which is light take same time to travel in same distance in air and water therefore when it enter water it reduce speed so obiviously it take more time to travel a given distance then in air so to follow the principle that it take same time time to travel in air and water ,light bent inorder to decrease distance so by decreasing distance it will take same time
When light travels from air to glass, it bends towards the normal due to the higher refractive index of glass. The ray diagram shows the incident ray coming from air, bending towards the normal at the air-glass interface, and then bending away from the normal as it exits the glass. This results in the light ray being refracted towards the surface normal in glass.
The type of glass typically used in a glass house is standard float glass, tempered glass, or insulated glass. These types of glass provide strength, insulation, and protection from the elements while allowing sunlight to enter the structure.
Glass does not undergo a chemical change under normal conditions, so it remains glass. However, it could be recycled or it can break into smaller pieces.
Tempered glass is typically used for windshields in vehicles. This type of glass is designed to shatter into small, dull pieces upon impact to reduce the risk of injury.
Photochromatic glass, also known as photochromic glass, is a type of glass that darkens in response to sunlight and returns to a clear state when sunlight is no longer present. This type of glass is often used in eyeglasses, windows, and sunglasses to provide protection against sunlight and reduce glare.
When light moves from glass into air at an angle, it is refracted away from the normal. This is because the speed of light increases as it moves from a denser medium (glass) to a less dense medium (air), causing the light ray to bend away from the normal.
The speed of light in water is slower than in glass because glass has a higher refractive index. When light rays pass from water into glass, they slow down due to the denser medium, causing them to refract towards the normal. Glass slows down light more than water because of its higher optical density.
Because the glass has many colours
Greenhouses are made with glass panes in which glass lets in light. so the sun rays enter through the glass and provide the light for the plants
The angle of refraction bends toward the normal when light travels from a less dense medium to a more dense medium, like from air to glass. This happens because the speed of light is slower in the denser medium, causing the light waves to refract towards the normal line.
To reduce reflection on glass surfaces effectively, you can use anti-reflective coatings or films, adjust the lighting in the room to minimize glare, or position the glass at an angle to reduce direct reflections.
Glass is used as an insulator, so I would say no.
Approx. 1 000 0C; but note that the expression "normal glass" is confuse.
Shoot it, look at the effects to the glass.
normal float glass screen is made of a number of glass sheets which can be standard.
Gorilla Glass is made stronger than normal glass by adding alumina, a type of ceramic material, during the manufacturing process.
When light travels from air to glass, it bends towards the normal due to the higher refractive index of glass. The ray diagram shows the incident ray coming from air, bending towards the normal at the air-glass interface, and then bending away from the normal as it exits the glass. This results in the light ray being refracted towards the surface normal in glass.