Answer:
Color of a flame depends primarily on its temperature. In the visible spectrum, red is the coolest, blue the warmest. The yellow you see in burning wood is from its lower temperature and the incandescence of fine particles in the flame called soot. The soot is formed because of a lack of oxygen during combustion. Natutral Gas burns at a higer temperature and tends to burn more completely in the environments we use it in, so you see a blue flame and little to no soot.
No, a blue flame of a Bunsen burner is hotter than a yellow flame. The blue flame indicates complete combustion of the gas, which produces a higher temperature compared to the yellow flame's incomplete combustion.
To change a blue flame to a yellow flame, you can adjust the air mixture going into the gas burner. Increasing the amount of air mixed with the gas will result in a yellow flame. This can usually be done by adjusting the air shutter on the burner.
A blue flame produces more energy compared to a yellow flame. The color of the flame is an indicator of the temperature of the burning process, with blue flames reaching higher temperatures due to complete combustion.
The hottest flame is the blue flame and the coolest flame is yellow.
The two main types of flames are blue flames and yellow flames. Blue flames indicate clean, efficient combustion with sufficient oxygen, while yellow flames indicate incomplete combustion with impurities present.
No, a blue flame of a Bunsen burner is hotter than a yellow flame. The blue flame indicates complete combustion of the gas, which produces a higher temperature compared to the yellow flame's incomplete combustion.
The Blue Flame Will Be Noisier. The Yellow Flame Is Called A Safety Flame Because Everyone can See it. There Are Two Blue Flames: Medium Roaring The Roaring Flame Has A Blue Cone In The Middle Of The Flame And It Is The Hottest. It Also Has More Oxygen. But Overall, The Blue Flames Will Be Noisier Than The Yellow Flame.
To change a blue flame to a yellow flame, you can adjust the air mixture going into the gas burner. Increasing the amount of air mixed with the gas will result in a yellow flame. This can usually be done by adjusting the air shutter on the burner.
Blue flame. because it does not have carbon
The yellow flame? i do not know but the blue flame is 2732 degrees Fahrenheit
A blue flame produces more energy compared to a yellow flame. The color of the flame is an indicator of the temperature of the burning process, with blue flames reaching higher temperatures due to complete combustion.
A blue flame is hotter than a yellow flame because a blue flame has more oxygen, so it has more energy to create extra heat. Therefore, a blue flame is more dangerous and a yellow flame is used in laboratories. The hottest part of the blue flame is right under the middle, this part is called the crown !!
the blue flame is hoter than the yellow flame.http://en.wikipedia.org/wiki/Flame hope this gives u the right picture
Because the bottom part of the flame is normally blue, and as it rises throughout the flame it changes its color to yellow. They call this the dirty flame because the original color is blue, and has become 'dirty' and changed to yellow.
A blue flame is louder than a yellow flame because there is more oxygen (air) flow present than with a yellow flame. The yellow flame indicates a lack of oxygen and incomplete combustion of the methane gas.
You can't it is always the same. You only use the blue flame to heat things because the yellow flame is the safety flame and the blue flame is hotter.
The two types of flames a Bunsen burner can produce are a luminous, yellow flame and a "roaring" blue flame. The blue flame is much hotter than the yellow flame.