0
Why does your ankle change direction when you are circling it clockwise if you draw the number six with your hand in the air?
When you draw the number six in the air with your hand, your brain sends signals to your hand to move in that specific pattern. Meanwhile, your ankle is also connected to the same neural pathways, causing it to unintentionally mirror the movement. This phenomenon occurs due to the interconnected nature of our neural pathways, resulting in the ankle changing direction as a result of the conflicting signals from the brain.
What else can I help you with?
Do tornadoes spin the same way as hurricanes?
Yes, at least for the vast majority of tornadoes. Both rotate cyclonically, that is, counterclockwise in the northern hemisphere and clockwise in the southern. However, a small number of tornadoes (less than 1%) rotate the opposite direction from normal. These are called anticyclonic tornadoes.
Is number of moles vector or scalar?
There is no direction in number of moles, so it is scalar.
What is the condensed structural formula for 1-2-4-trichlorobenzene?
C6H3Cl3 The benzene ring has 6 carbon atoms, each of which is given a number and this continues in a clockwise direction. Chlorine atoms are attached to carbons 1, 2 and 4.
How can you change the poles of genrator?
To change the polarity of a generator, you need to physically rearrange the excitation windings or change the direction of the current flow in the windings. This process typically involves disassembling the generator to access the windings and making the necessary adjustments. It is a complex task that should be done by a qualified technician.
How can you make gears in order that they rotate in the same direction?
by changing the length between them, to a big or small gap. The shorter the gap the quicker the change would be, the bigger the gap the longer the it takes to change. So if you put spacers in between each gear that would help with the speed of the change.
What is bearing in trigonometry?
It is a measure of angular displacement, expressed as a three digit number. It starts at North = 000 and is measured in the clockwise direction.
When do you change the direction of an inequality symbol?
When a side is multiplied or divided by a negative number.
How do you figure out the bearing point in trigonometry in math?
You find the angle with a fixed direction using trigonometry. You then convert it to an angle measured in degrees, clockwise from North, and written as a three digit number.
If you multiply or divide both sides of an inquality by a negative number you need to?
Change the direction of the inequality.
What would you do to change the direction and increase the strength of the field?
To change the direction of the magnetic field, you can reverse the direction of the current flow in a wire or change the orientation of the magnet. To increase the strength of the magnetic field, you can increase the current flow in a wire, increase the number of coils in a solenoid, or use a stronger magnet.
What happens to the inequality symbol when you subtract a negative number?
The inequality symbol doesn't change direction in this case.Note that that is the same as adding a positive number.Note also that if you MULTIPLY or DIVIDE by a negative number, then you need to change the direction of the inequality symbol.
What is the placement of the plug wires on the distributor cap for a 283 engine?
FACING THE DISTRIBUTOR WITH THE LITTLE DOOR TOWARD YOU, NUMBER ONE IS THE FIRST TERMINAL TO THE LEFT. THE FIRING ORDER IS 18436572 GOING IN A CLOCKWISE DIRECTION
How Do You Do A Combo Lock?
First, spin the dial clockwise a few times to reset the lock. Then continue turning clockwise until you reach the first number of the combination. Then spin the dial counter-clockwise one full revolution so you are back at the first number. Then continue turning counter-clockwise until you reach the second number. Then turn the dial clockwise until you get to the third number (do not spin the extra revolution this time). At this point, you should be able to pull the lock open.
How can gears change the size and direction of a force?
Gears change the size of a force by varying the number of teeth on the gears in contact. Larger gears transmit force over a larger area, reducing the pressure and increasing the force. Gears can change the direction of a force by meshing at an angle, causing the force to transfer to the desired direction.
How do you know when to reverse the direction of an inequality symbol?
u only reverse the sign when u multiply or divide by a NEGATIVE number...otherwise u don't change the direction
How do you tell which direction is right when installing the timing sprokets on a 2001 Kia Sportage?
when cylinder number one is at TDC, and the cams line up with there respective timing marks.Don't forget the crankshaft too.Only go clockwise.
How will you multiply a vector by positive number?
A positive scalar multiplied by a vector, will only change the vector's magnitude, not the direction. A negative scalar multiplied by the vector will reverse the direction by 180°.
