answersLogoWhite

0

There could be several reasons for this issue, including an overloaded circuit, faulty wiring, a problem with the AC unit itself, or an issue with the breaker. It's recommended to have a professional electrician inspect the system to diagnose and fix the problem.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

What size breaker should you use for a unit that draws 58 running amps?

To determine the correct size breaker, you need to ensure that it is rated higher than the running amps of the unit. For a unit drawing 58 running amps, a breaker that is rated for at least 70 amps would be appropriate to provide a safety margin and prevent tripping due to overload.


Why does your central heat keep tripping the circuit breaker?

This is an interesting question with unfortunately not quite enough information for a good answer. But I'll give you a few things that could cause this situation and the conditions in which they will occur.1. This problem has always occurred: The wiring/circuit breaker that controls the unit are not rated high enough to accommodate the unit. Make sure that both are rated for the draw listed on a tag somewhere on the unit.2. This is a recent problem that is getting worse with time: The wiring going to the unit degrades with time, as does the circuit breaker itself, limiting their ability to carry current to the unit causing it to try and draw more amperes than the breaker will allow. Replace the wiring and/or breaker with the appropriate size needed for your application.3. This happens at times when there are a large amount of electrical items on in your dwelling. This means that the circuit may be being used to power other devices as well, and combined they are overloading the breaker. This is unlikely as the unit should have a dedicated circuit. Remove all other devices from the circuit, or run a new circuit to the unit of the appropriate rating.4. This is a recent problem and is consistent in the time it takes for the breaker to trip. The wiring may have been damaged in some way, such as a mouse chewing on the wire, or a nail/screw being driven through it. This is the most dangerous of the options as it could cause a fire when you reset the breaker. Check the wiring for damage, and replace it with the appropriate size for your application.I highly recommend that you seek out an electrician to rectify this problem. Not a Handyman, or someone of that nature, but a true licensed Electrician. This could be a serious problem that puts you, your home, and your family in danger.


What is the standard SI unit for measuring the mass of the liquid in the breaker?

The standard SI unit for measuring mass is the kilogram (kg).


Can you plug a 9000 BTU air conditioner unit into a 110-120 volt line safely?

Check and see what the amperage the A/C unit draws. These types of appliances should have their own dedicated circuit. If there is nothing of a high load on the existing 120 volt circuit and the A/C unit draws less than 12 amps, the unit should operate without tripping the breaker. If the A/C unit only has wattage and no amperage shown on the nameplate use this equation to find the amperage. I = W/E, Amps = Watts/Volts.


Your breaker won't stay on and continues to flip when ac unit is on i've changed circuit breakers out didn't work then upped them from 40 to 50 what should you do?

Please call an electrician before you burn your house down! Changing a 40A breaker to a 50A breaker will eventually melt your wire's insulation and start a fire if it continues to trip. I would say you should change it back, but you should let the electrician do that. There is a short or overload in that circuit, which needs to be corrected before you attempt to reapply power. Circuit breakers are not there to make your life harder, they are there to make your life longer! Have a professional electrician correct the short or overload and then replace the breaker with a properly rated breaker before energizing the A/C unit.

Related Questions

Why is my AC breaker tripping?

Your AC breaker may be tripping due to an overload of electrical current, a short circuit, or a faulty breaker. It is important to have a professional electrician inspect and repair the issue to ensure safe operation of your AC unit.


Why does my portable AC keep tripping the breaker?

Your portable AC may be tripping the breaker due to an overload of electrical current. This can happen if the AC unit is drawing too much power or if there is a fault in the electrical system. It is important to check the power requirements of the AC unit and ensure it is plugged into a dedicated circuit to prevent tripping the breaker. If the issue persists, it may be necessary to have a professional inspect the unit for any potential problems.


Why does my AC unit keep tripping the breaker?

Your AC unit may be tripping the breaker due to an electrical overload, a faulty capacitor, a dirty air filter, or a refrigerant leak. It is recommended to have a professional HVAC technician inspect and diagnose the issue to ensure proper and safe operation of your AC unit.


Why does my air conditioner keep tripping the breaker?

Your air conditioner may be tripping the breaker due to an electrical overload, a faulty component in the AC unit, or a problem with the circuit breaker itself. It is important to have a professional technician inspect and repair the issue to prevent further damage.


Why does the AC keep tripping the breaker?

The AC may be tripping the breaker due to an overload of electrical current or a short circuit in the system. This can happen if the AC unit is drawing more power than the breaker can handle, or if there is a fault in the wiring or components of the AC unit. It is important to have a professional inspect and repair the AC to prevent further issues.


What should I do if my AC unit breaker keeps tripping?

If your AC unit breaker keeps tripping, you should first try resetting the breaker and checking for any obvious issues like a dirty air filter or blocked vents. If the problem persists, it's best to call a professional HVAC technician to diagnose and fix the underlying issue.


Why is my AC tripping the breaker?

Your AC may be tripping the breaker due to an electrical overload, a faulty component in the AC unit, or a problem with the circuit breaker itself. It is recommended to have a professional HVAC technician inspect and diagnose the issue to ensure proper and safe operation of your AC system.


Why does my window AC keep tripping the breaker?

Your window AC may be tripping the breaker due to an overload of electrical current, a faulty circuit breaker, or a short circuit in the AC unit. It is important to have a professional electrician inspect and repair the issue to prevent further damage or safety hazards.


How can I prevent my AC from tripping the breaker?

To prevent your AC from tripping the breaker, make sure it is not overloaded by running other high-power appliances simultaneously. Keep the AC unit clean and well-maintained to ensure proper airflow. Consider installing a dedicated circuit for the AC to prevent overloading the breaker.


What size breaker should you use for a unit that draws 58 running amps?

To determine the correct size breaker, you need to ensure that it is rated higher than the running amps of the unit. For a unit drawing 58 running amps, a breaker that is rated for at least 70 amps would be appropriate to provide a safety margin and prevent tripping due to overload.


What best breaker rating for 1.5 hp air con unit?

The breaker you use is determined by the size of the wire in the wall not by what is being connected to that circuit. If you have 14/2 wire then use a 15 amp breaker. If you have 12/2 wire then use a 20 amp breaker. The breaker protects the wiring not the item connected.


Where to find trailer storage unit in Arkansas?

Where can I find a trailer storage unit that I can keep on my property? I live in Arkansas.