The coarse objective knob when turned downward will cause the microscope lens to crush into the test slide
The coarse adjustment knob on a microscope should never be used with the high-power objective lens. This can cause damage to both the lens and the slide being viewed. Instead, it is best used with the low-power or scanning objective lens for initial focusing.
First of all, one should never call it high power, it is morecommonly called the "high objective", yet that is not what this question is asking. To answer the question: You use the fine adjustment knob. This knob should be located near the coarse adjustment knob, on the opposite side of the microscope (at the same height as the coarse adjustment knob), or even as a separate knob protruding from the coarse adjustment knob. The fine adjustment knob is smaller in size. You should never, ever use the coarse adjustment knob under the high objective, you could scratch the microscope slide, cover slip, high objective lens, or in a worst case scenario break the high objective lens.
We avoid using the coarse focus knob with the 40x lens because it can lead to a high risk of crashing the lens into the slide, potentially damaging both the slide and the objective lens. The coarse focus knob moves the stage significantly, which is suitable for lower magnifications, but at high power, even small movements can cause contact. Instead, the fine focus knob should be used to make precise adjustments for clear imaging.
Oculars are generally 10x, so I assume you're talking of the 40x objective (10x40=400, how total magnification is derived). The most important rule is NEVER touch the coarse focus adjustment, only the fine; you run the risk of breaking the specimen or the objective if you mash the two together. Other things to consider- high light level, make sure koehler illumination is established and adjust your field aperture to eliminate refringence.
A tool grinder should never be used for rough grinding metal because it is designed for precision work and finishing operations, not for heavy material removal. Using it for rough grinding can damage the grinding wheel, lead to overheating, and reduce the tool's lifespan. Additionally, the finer tolerances of a tool grinder may compromise safety and effectiveness when handling coarse grinding tasks. Instead, dedicated rough grinding tools are better suited for such applications.
The coarse adjustment knob on a microscope should never be used with the high-power objective lens. This can cause damage to both the lens and the slide being viewed. Instead, it is best used with the low-power or scanning objective lens for initial focusing.
First of all, one should never call it high power, it is morecommonly called the "high objective", yet that is not what this question is asking. To answer the question: You use the fine adjustment knob. This knob should be located near the coarse adjustment knob, on the opposite side of the microscope (at the same height as the coarse adjustment knob), or even as a separate knob protruding from the coarse adjustment knob. The fine adjustment knob is smaller in size. You should never, ever use the coarse adjustment knob under the high objective, you could scratch the microscope slide, cover slip, high objective lens, or in a worst case scenario break the high objective lens.
Using the coarse adjustment knob on high power can potentially damage the microscope or the slide being observed due to the high magnification and close proximity of the objective lens to the slide. It is better to make coarse adjustments on low power to avoid hitting the objective lens against the slide.
Using the coarse adjustment on higher power can risk damaging the lens or the slide because the distance between the lens and the slide is very small. It can also cause the objective lens to hit and break the coverslip or slide. Finer adjustments should be made with the fine adjustment knob when using higher magnifications to prevent this.
The ones that you never hear about, which is probably why you don't remember the name of the country.
We avoid using the coarse focus knob with the 40x lens because it can lead to a high risk of crashing the lens into the slide, potentially damaging both the slide and the objective lens. The coarse focus knob moves the stage significantly, which is suitable for lower magnifications, but at high power, even small movements can cause contact. Instead, the fine focus knob should be used to make precise adjustments for clear imaging.
Using the coarse adjustment knob on high power may cause the objective lens to come in contact with the slide, potentially damaging both the lens and the slide. It can also lead to misalignment of the optics, resulting in blurry images and potential damage to the microscope.
The coarse adjustment knob should never be used when viewing in high power with a compound microscope. When in high power, use the coarse adjustment (the knob smaller than the coarse adj.) to more accurately focus on the subject.
The object on the viewing stage is close to the lens of a microscope. Racking downward risks the lens touching the object and damaging either the object itself or the lens. Before moving the lens down, make sure you can see the lens and the object from the side of the microscope to void the two touching each other.
Yes Of Coarse ....
There can never be an answer. But probably blonde.
Oil immersion should never be used with medium or high power objectives. Oil is only used with oil immersion objectives to maximize resolution by reducing light refraction. Using oil with medium or high power objectives could damage the lenses and affect image quality.