The boiling point (BP) of water at 1489 torr is 120 degrees Celsius because the boiling point of a liquid increases with pressure. Standard atmospheric pressure is 760 torr, at which water boils at 100 degrees Celsius. At higher pressures, such as 1489 torr, the increased pressure requires more heat energy to allow water molecules to escape into the vapor phase, thus raising the boiling point to 120 degrees Celsius.
When water changes from 80°C to 120°C, it transitions from being very hot but still liquid to reaching its boiling point and turning into steam. At 100°C, water boils and changes state from liquid to gas. So, by increasing the temperature from 80°C to 120°C, you are essentially bringing the water to its boiling point, causing it to evaporate into steam.
A 120 degree angle is an obtuse angle. This means that the angle is between 90 and 180 degrees.
According to medical research, setting a water heater to 120 degrees will prevent hot water burns. Higher settings, such as 140 degrees, can cause a serious burn in as little as 10 seconds, especially to elderly people and yo very young children.
120 grams of water is equivalent to approximately 0.5 cups.
The time it takes for hot water to begin freezing depends on its initial temperature, the environment, and the rate of heat loss. Generally, hot water will freeze faster than cold water due to the Mpemba effect, which is when hot water freezes quicker than cold water under certain conditions. However, it is difficult to provide an exact time frame without specific details about the initial temperature and surrounding conditions.
61.3
i think this can be done by redusing the pressure..
where is 120 degree longitude
At 0,5 bar water boils at about 176 °F or 80 °C At 1 bar water boils at about 212 °F or 100 °C At 2 bar water boils at about 250 °F or 120 °C See the link below for a graph, a table and an explanation.
North America is at 60 degrees north and 120 degrees west.
When water changes from 80°C to 120°C, it transitions from being very hot but still liquid to reaching its boiling point and turning into steam. At 100°C, water boils and changes state from liquid to gas. So, by increasing the temperature from 80°C to 120°C, you are essentially bringing the water to its boiling point, causing it to evaporate into steam.
A shape that has 120-degree angles is a regular hexagon. In a regular hexagon, all six angles are equal, and each measures 120 degrees. Additionally, certain irregular shapes or polygons can also have 120-degree angles, but the regular hexagon is the most common example.
120 degrees
120 degrees.
A 120-degree angle is an obtuse angle, meaning it is greater than 90 degrees but less than 180 degrees. It is formed when two lines intersect and the angle between them measures 120 degrees. In a triangle, a 120-degree angle would typically be found at one of the vertices.
one BTU is approximately the amount of energy needed to heat 1 pound of water 1 degree Fahrenheit. Here is a start ; now find out how much a pound of water weighs then work through it.
A 120 degree angle is an obtuse angle. This means that the angle is between 90 and 180 degrees.