answersLogoWhite

0

The most basic reason to use 220 instead of 11o is that for a given load Watts= Volts x Amperes Double the volts and you will halve the amperes. The rating of wire is the amount of amperes it can safely carry. Less amperes means you can use a smaller wire size. This will save money on the initial installation.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Natural Sciences

Can you use 110v of two phase insted 220v?

Yes, you can use 110V from two phases instead of 220V, but it depends on the specific application and equipment requirements. If your device is designed to operate on 220V, using 110V may not provide sufficient power, potentially leading to inadequate performance or damage. Additionally, ensure that the two 110V phases are correctly configured to avoid any electrical issues. Always consult an electrician or refer to the device's specifications before making changes.


Can you use the 220v 50hz appliances in 110v 60hz?

Depends. Some smaller stuff can usually run on both, in which case it will be printed on them. If it isn't, you can't run a 220v item on 110v.


What causes a 220v wire to pull only 110v?

The fact that it's supposed to. Voltage is stated as the difference between the two wires carrying electricity to the load. When they bring power to the house from the utility, you get two wires carrying 110v but they're 180 degrees out of phase. Imagine one carries positive 110v and the other carries negative 110v. If you hook one of these wires plus a neutral (zero volts) to the load, you get 110v--110v over 0v. If you hook both of them to the load, you get positive 110v over negative 110v, or 220v. So...red to white is 110v, black to white is 110v, red to black is 220v.


Plug a 110v hair straightener into a 220v outlet?

It is not recommended to plug a 110v hair straightener into a 220v outlet as it may damage the appliance and pose a safety hazard. You should use a voltage converter or transformer to safely use the hair straightener with the higher voltage outlet.


Can you use a 220v outlet to plug a 110v electronic device into?

You cannot directly plug a 110v device into a 220v outlet. This can cause damage to the device or even create a safety hazard. You would need a voltage converter or transformer to safely convert the 220v outlet to the appropriate voltage for the 110v device.

Related Questions

Can you use 110v of two phase insted 220v?

Yes, you can use 110V from two phases instead of 220V, but it depends on the specific application and equipment requirements. If your device is designed to operate on 220V, using 110V may not provide sufficient power, potentially leading to inadequate performance or damage. Additionally, ensure that the two 110V phases are correctly configured to avoid any electrical issues. Always consult an electrician or refer to the device's specifications before making changes.


How can I use a step-up transformer to convert 110v to 220v?

To convert 110v to 220v using a step-up transformer, connect the 110v input to the primary winding and the 220v output to the secondary winding of the transformer. The transformer will increase the voltage while maintaining the power output.


Will a device designed for 110v work on 220v?

No, a device designed for 110v will not work on 220v without a voltage converter.


Can you use the 220v 50hz appliances in 110v 60hz?

Depends. Some smaller stuff can usually run on both, in which case it will be printed on them. If it isn't, you can't run a 220v item on 110v.


Can a device designed for 110v work on 220v?

No, a device designed for 110v cannot work on 220v without a voltage converter.


Can you use your canon mx340 printer with 220v and 110v?

Yes, it will work on either voltage.


What causes a 220v wire to pull only 110v?

The fact that it's supposed to. Voltage is stated as the difference between the two wires carrying electricity to the load. When they bring power to the house from the utility, you get two wires carrying 110v but they're 180 degrees out of phase. Imagine one carries positive 110v and the other carries negative 110v. If you hook one of these wires plus a neutral (zero volts) to the load, you get 110v--110v over 0v. If you hook both of them to the load, you get positive 110v over negative 110v, or 220v. So...red to white is 110v, black to white is 110v, red to black is 220v.


Can you attach an iron machine of 220v in a 110v socket?

No


Can you plug your 220V electric piano into a 110V socket?

No.


How do you convert agenerator of 80kva with an output of110 v to 220v?

Best way is to use a step up transformer to step up the voltage from 110V to 220V


Plug a 110v hair straightener into a 220v outlet?

It is not recommended to plug a 110v hair straightener into a 220v outlet as it may damage the appliance and pose a safety hazard. You should use a voltage converter or transformer to safely use the hair straightener with the higher voltage outlet.


You bought some electronics in China which requires 220v In that case can you use these devices in Canada which uses 110v without getting a voltage converter to convert from 220v to 110v.?

No.. you can't... You will actually be damaging your instrument.. It is highly recommended that you use voltage converter... I think it is not too costly