Lsten to your teacher
and
stop talking to your sitmate
-GRade 7
-SUS-bryan
A thermocouple or a pyrometer is commonly used to measure temperatures above 1250 degrees Celsius. These devices are designed to withstand high temperatures and provide accurate temperature readings in such extreme conditions. It is important to select the appropriate type of thermometer that can handle the desired temperature range for accurate results.
Rubbing alcohol is used in thermometers because it has a lower freezing point than water, allowing the thermometer to measure lower temperatures accurately. Additionally, alcohol has a wider temperature range than mercury, making it suitable for various types of thermometers.
You should use a thermometer where the average temperature you are measuring is somewhere near the middle of the range of your thermometer, and with the narrowest band possible that still keeps the limiting temperatures inside 10-90% of its range. For example, if you are measuring something that is expected to be within 95-105 degrees, you should pick a thermometer that reads 94-106 degrees, or something close to that. If you are cooking a turkey, this same 94-106 degree thermometer would be highly inaccurate.
it measures temperatures between -250 and 1600 degree and it can measure a wider range of temperatures
A platinum thermometer is a type of resistance thermometer that uses a platinum element as the temperature-sensing material. Platinum is often chosen for its high accuracy and stability over a wide range of temperatures, making platinum thermometers suitable for precision temperature measurement applications.
The range of a thermometer refers to the range of temperatures it can measure accurately. For example, a thermometer with a range of -20°C to 100°C can accurately measure temperatures within that range, but may not be accurate outside of it.
Because it has been designed to measure accurately over a narrow range of temperatures found in clinical medicine.
A clinical thermometer - is designed to measure typical human temperatures. The 'normal' temperature of a human is 37 C (98.4 F). There's no point in using a thermometer that can measure a huge range - when human temperatures fall within a very narrow range.
A thermometer used to measure body temperature is extremely accurate over an extremely small range of temperatures. It will give the temperature to the tenth of a degree. A laboratory thermometer does not have the partial degree separations but gives the temperature over a much wider range of temperatures.
A thermometer used to measure body temperature is extremely accurate over an extremely small range of temperatures. It will give the temperature to the tenth of a degree. A laboratory thermometer does not have the partial degree separations but gives the temperature over a much wider range of temperatures.
A clinical thermometer is designed to measure body temperature accurately within a narrow range (around 95°F to 110°F) because it focuses on the temperature range relevant for human health assessment. This narrow range allows for precise readings and enhances the device's sensitivity to detect even slight variations in body temperature, which is crucial for monitoring health conditions accurately.
A thermocouple would allow the thermometer to measure the largest range of temperature, as it can measure from extremely low temperatures to very high temperatures. Thermocouples are made of two different metals that generate a voltage proportional to the temperature difference between the hot and cold junctions.
No, a mercury thermometer typically has a limited range, generally up to around 500 degrees Fahrenheit or 260 degrees Celsius. Attempting to measure temperatures between 500 and 600 degrees with a mercury thermometer can damage the thermometer due to its thermal expansion limits. If you need to measure temperatures in that range, it's best to use a thermometer specifically designed for high-temperature measurements.
A clinical thermometer can only measure human body temperatures since it can measure no less than 35 degrees celcius and no more than 42 degrees celcius. An ordinary thermometer can measure and object or substance at any temperature. A clinical thermometer can only measure human body temperatures since it can measure no less than 35 degrees celcius and no more than 42 degrees celcius. An ordinary thermometer can measure and object or substance at any temperature.
a lab thermometer did not have a constriction as compared to clinical thermometer. it have a wide range of measurement and usually contains alcohol
Constant gas thermometers are preferred over constant volume thermometers because the gas thermometer can be easily adjusted to atmospheric pressure, providing accurate readings. Additionally, the gas thermometer can measure a wide range of temperatures, making it versatile for various applications. Constant volume thermometers are limited in the range of temperatures they can measure and are less commonly used for precision measurements.
No, a clinical thermometer is not suitable for measuring the temperature of a candle flame. Candle flames burn at temperatures much higher than the range typically measured by a clinical thermometer. To measure the temperature of a candle flame, a specialized high-temperature thermometer or pyrometer would be more appropriate.