0
What else can I help you with?
Will a 12 volt auto light-bulb work on 12 volt AC?
Yes, a 12 volt auto light bulb can work on 12 volt AC, but the light output might be slightly lower compared to when using DC. The bulb will still produce light, but it may flicker due to the alternating current.
As I just got a 12-volt GPS for a truck with a 24-volt system and the GPS must be plugged into the lighter socket is there a cheap and easy way to connect the GPS into the truck's electrical system?
just so you know, all trucks used to have a full 24 volt system and cars had a 6 volt system so the design is not a nightmare. still a lot of tractors about with a 6 volt system. now a good electrician can connect a 12 volt unit to a 24 volt system if he knows what he is doing it is just a matter of knowing where to do it on a battery. you can also buy a voltage converter and wire it in. and yes you can still buy 24 light bulbs Before you go deep inside this, check the voltage on the cigarette lighter. It should only be 12 volts. The 24 volts are used in starting the truck only. By thinking this through, designing a vehicle that worked on a 24-volt electrical system would be a disaster. No one would buy it. All the current electrical components for vehicles are for 12-volt systems. Lights, gauges, radios - everything! How much trouble would it be to replace something like, say, a map light if a 24-volt lamp had to be located? Alternativley Check the powercable as many of them can work on different voltage say from 10 to 30 volts and power the gps with the correct voltage.
How do you know whether to get 120 volt or 130 volt light bulb?
Choose a bulb with the same voltage as your fixture to prevent damage or risk of overheating. If the fixture specifies 120 volts, use a 120-volt bulb. If in doubt, consult the manufacturer's instructions or a professional electrician.
How to Replace 120 volt pool light with a 12 volt pool light?
To replace a 120 volt pool light with a 12 volt pool light, you will need to ensure that the new light is compatible with your pool's existing wiring and transformer. Consult the manufacturer's instructions for the specific installation steps. It is recommended to hire a professional electrician to safely make this switch.
How do you remove 240 volt light sensor and return to switch operation?
Remove the light sensor and place a switch between the red and black wires. The black wire is one leg of the "hot" pair and the load is connected to the red wire. This will now switch the black hot through the red wire that goes to the load.
Do you need a voltage regulator if you hook up a 12 volt light to a 24 volt system?
Hook a 12 volt light to a 24 volt system and the light will burn out in seconds. You need a step-down voltage converter to do this.
Why Volt meter dash light on 95 Explorer not working?
could be a sensor or relay
Can you use a 130 volt light bulb on a 120 volt supply?
Yes, in fact that is what a rough service bulb is rated at. The bulb used on a 120 volt system will have a reduced wattage output as to what it would be on 130 volts.
Can you use 220 volt light bulb on 120 volt system - I know the reverse would probably blow the bulb so wouldn't European 220 Volt do ok in 120 volt socket or would it be dimmer than it normally would?
Yes a 220 volt light bulb will run on a 120 volt circuit but at 1/4 of the wattage that the light bulb is rated at. A 100 watt light bulb on 220 would would be equal to a 25 watt light bult on 120 volt system.
Can you hook up a 12 volt light to a 33cc scooter?
Yes, if you have a 12 volt battery and/or a charging system to support it.
Will a 12 volt auto light-bulb work on 12 volt AC?
Yes, a 12 volt auto light bulb can work on 12 volt AC, but the light output might be slightly lower compared to when using DC. The bulb will still produce light, but it may flicker due to the alternating current.
3rd brake light out on a 86 Buick Skyhawk is this 12 volt?
They are run on the vehicles 12 volt dc electrical system.
What are the 3 wires on a map sensor for a 5.7 hemi?
5 volt supply, sensor ground and signal voltage.5 volt supply, sensor ground and signal voltage.
Is my 1949 truck 6 volt or 12 volt?
If your 1949 truck is a CHEVY or GMC and it still has the original electrical system, it would be 6 volt, negative ground. If it is a Dodge or a Ford with the oringinal electrical system it would be 6 volt, positive ground.
Can you jump a 24 volt system with a 12 volt system?
No
What does volt light mean on dashboard?
If the light stays on it indicates your charging system has malfunctioned. Usually this means the alternator has failed, but not always.
As I just got a 12-volt GPS for a truck with a 24-volt system and the GPS must be plugged into the lighter socket is there a cheap and easy way to connect the GPS into the truck's electrical system?
just so you know, all trucks used to have a full 24 volt system and cars had a 6 volt system so the design is not a nightmare. still a lot of tractors about with a 6 volt system. now a good electrician can connect a 12 volt unit to a 24 volt system if he knows what he is doing it is just a matter of knowing where to do it on a battery. you can also buy a voltage converter and wire it in. and yes you can still buy 24 light bulbs Before you go deep inside this, check the voltage on the cigarette lighter. It should only be 12 volts. The 24 volts are used in starting the truck only. By thinking this through, designing a vehicle that worked on a 24-volt electrical system would be a disaster. No one would buy it. All the current electrical components for vehicles are for 12-volt systems. Lights, gauges, radios - everything! How much trouble would it be to replace something like, say, a map light if a 24-volt lamp had to be located? Alternativley Check the powercable as many of them can work on different voltage say from 10 to 30 volts and power the gps with the correct voltage.
