0
What else can I help you with?
What simple machine would be useful to get supplies up to a tree house?
Use a pulley and a rope and a flat piece of wood or a bucket:)
Simple machines in a flat iron?
Yes, there is a lever in the flat iron. The fulcrum is where the 2 types of the flat iron come together, and your input force is when you squeeze the 2 parts together to grab your hair.
What does the simple machines help us?
Simple machines are the most basic ways of making work easier or more efficient. There are 6 of them (if the different kinds of levers are considered the same simple machine): Inclined plane: Spreads out the work needed to move the object, so less is needed at once. Lever (first class): Changes direction of force applied. Load is on the opposite side of the fulcrum than the side that the force is applied on. Lever (second class): The load and force are on the same side of the fulcrum, with the force being applied further from the fulcrum. The work is easier, but the load isn't lifted as high. Lever (third class): Similar to second class levers, the load and force are on the same side as the fulcrum, but the force is closer to the fulcrum. The work is therefore harder, but the load is lifted more efficiently Wheel and axle: Just what it sounds like. The wheel is a simple, but brilliant tool that makes it so the inside and the outside make the same amount of rotations in the same amount of time, but move at different speeds. Turning the axle makes the outside of the wheel move fast, while turning the outside of the wheel makes turning the axle easy. Pulley: Made up of a wheel and a rope, the rope fitting on the groove of the wheel. This machine can either change the direction of the force, increase the efficiency of lifting a load, or make lifting the load easier. The more times the rope goes around a set of two wheels, the more efficient the pulley gets Screw: Changes the direction of force from around in a circle to down. The tool the "Screw" was named after this simple machine. Wedge: Also changes the direction of force from in one direction to out. This is used by scissors, axes, knives, or anything else that can cut.
How do you prepare the materials in readiness for the welding activity?
you must make sure the edges are free from excessive surface contamination e.g Rust, ensure edges to be welded are correctly prepared e.g, made flat.
What simple machine are in a bolt?
A bolt is one of the easiest examples of a easy screw machine. It is a mechanical device that is used to preserve the two objects collectively with the assist of a washer and a nut. The bolt has thread cuttings all over its size that flawlessly suit the threads on the inner of a nut.
What simple machine is a flat sloped surface or ramp?
A flat sloped surface or ramp is classified as an inclined plane, which is a type of simple machine. It allows objects to be raised or lowered with less effort compared to lifting them straight up. By increasing the distance over which the force is applied, an inclined plane reduces the amount of force needed to move an object vertically. This makes it easier to transport heavy items to higher or lower elevations.
Is a simple machine has a flat surface with one end higher than the other?
No, a simple machine is a mechanical device that helps make work easier. A flat surface with one end higher than the other is not typically considered a simple machine, but rather a ramp or inclined plane.
What simple machine is flat level surface?
LEVER
What is the word for a flat sloped surface?
An inclined plane
A simple machine with a flat surface set at an angle to a horizontal surface?
A simple machine that consists of a flat surface set at an angle to a horizontal surface is known as a ramp. Ramps make it easier to move heavy objects on wheels up or down levels.
What type of simple machine that has a flat surface with one and higher than the other one?
That sounds like an inclined plane. It is a simple machine with a flat surface that is tilted at an angle, allowing objects to be moved from a lower to a higher position with less force.
What is a simple machine made of a flat surface set at an angle to another surface it is sometimes called a ramp?
inclined plane
What are the examples for the simple machine which is called a screw?
a simple machine made of a flat sloping surface wrapped around a small rod. a simple machine made of a flat sloping surface wrapped around a small rod.
Explain this phrase 'a lever is a simple machine'?
The phrase is true if you take it literally. A lever is a simple machine. Levers are flat bars that are pivoted on a surface. It is closely related to an inclined plane.
Is a wheel and axle a form of inclined plane?
No, a wheel and axle is a simple machine that consists of a wheel attached to a shaft. It works by rotating around its axis to transfer force or motion. In contrast, an inclined plane is a flat, sloped surface that allows objects to be moved up or down with less force.
What type of simple machine is the bottom of a sink?
The bottom of a sink is typically a flat surface, so it does not fall under any specific type of simple machine classification. However, the faucet or tap attached to the sink is an example of a simple machine called a lever.
What type of simple machine is an ironing board?
An ironing board is a type of inclined plane simple machine. It allows for clothes to be pressed against a flat surface with less effort, making ironing easier.
