0
What else can I help you with?
Why is engineering drawing considered the graphical language of engineers?
An engineering drawing, that is, a technical drawing or set of schematics that follow international standards of commonly recognized de-facto rules can be understood without language, and with a minimum amount of words written on the drawing. The drawing conveys a lot of information that would be error prone and ambiguous when conveyed through human language.
What is the teaching load for assistant professor in engineering college as per AICTE?
There is Rule in UGC norms about teaching load of Assistant Professors. I did not find any Rules as per AICTE. The teaching load of Assistant Professors is 16 and of Associate Professors and Professors it is 14 as per UGC Gazette.
What is new gtu rules?
For attendnce
What is standard method of measurement 7?
The Standard Method of Measurement known is the SMM7 publish by the the Royal Institution of the Chartered Surveyors is the appropriate method of measurement for building works. The SMM7 rules are simplified enough to produce shorter bill of quantities and the contents updated to conform to modern practice.
What is engineering notation?
Scientific notation is a way to "easily" or "conveniently" write very large or very small numbers. As these numbers are frequently encountered in the sciences, the term scientific notation was introduced to name this "neat" way to "package" these quantities so that they might be more easily grasped and understood.Scientific notation is a useful way of dealing with very large and very small numbers. It allows them to be presented in a form where their magnitude can be seen more easily. Also it can simplify calculations by allowing you to concentrate on the significant digits rather than the orders of magnitude which are very easily dealt with. This latter advantage has somewhat diminished with the widespread availability of calculators and computers. But previously, people used log tables and slide rules for multiplication and division. These calculating devices depended on thinking of numbers in their scientific notation and utilizing the significant digits.The Form of Scientific NotationThe idea behind scientific notation is to write numbers in terms of powers of ten - either positive (for very large numbers), or negative (for very small ones). As an example, consider the mass of an electron, which is approximately 0.0000000000000000000000000001 grams. An easier way to write it uses the significant digit 1 and an exponent based on a multiple of ten. The number becomes the easily represented 1 x 10-28 g.The simple rule is to take your "numbers" and move the decimal point to the left or right so that only one figure is to the left of the decimal. Then write the rest of the significant digits to the right of the decimal, and tack on the appropriate power of ten (again, either positive or negative) to restore the proper value to the figure.Coefficient and Base in Scientific NotationScientific Notation also avoids the headache and potential errors of counting lots of zeros.The number 123000000 in scientific notation is written as:1.23 x 108The first number 1.23 is called the coefficient. It is always a single digit followed by a decimal point and then the rest, but usually only two digits.The second number is called the base and in scientific notation must always be 10. In the number 1.23 x 108 the number 8 is the exponent or power of ten.How to Write a Number in Scientific NotationFor large numbers :1) Put the decimal after the first digit and drop the zeroes. In the number 123,000,000 the coefficient will be 1.232) Then write the times "x" and the base 10.3) To find the exponent count the number of places from the "new" decimal point to the end of the number. In 123000000 there are 8 places. Therefore the exponent is 8.There are some minor variations that have evolved to fill different needs, usually because not all fonts or printers allow superscripts: 123000000 can be written as:1.23 E+11 or 1.23 X 10^11 or 1.23 x 1011For small numbers :For numbers less than one we use a similar approach. These numbers all have negative exponents. For example 0.00000123 second (1.23 microseconds) is written:1.23 E-6 or 1.23 x 10^-6 or 1.23 x 10-6Take the original number 0.00000123 and shift the decimal point to the right until you get the coefficient in proper form, as above. The number of digits shifted is then the negative exponent.Notes:a) Numbers less than one all use negative exponents, but what about negative numbers, such as -0.04? We can write this as-4.0 x 10-2b) Always make sure the E is capitalized in 1.23 E-6, otherwise it can be confused with "e" the base of the natural log system.c) Some scientific and engineering fields have special rules, such as electronics where scientific notation is usually in powers divisible by three, such as -3, 3, 6, 9, 12, etc. This is because electronic components are made using standard SI prefixes such as kilo, micro, nano, or pico.d) Usually, Scientific Notation is ignored if you want to keep numbers in common formats, such as 315 microseconds, instead of 3.15 x 10-4 seconds, but this is a matter of preference.Scientific notation is normally used for numbers that are either far to large or far to small to be written conveniently in decimal notation.A,BFor example the Earth's mass is approximately: 5,973,600,000,000,000,000,000,000.0 kgIn scientific notation this would be written as:5.9736 x 1024 kg.In normalised scientific notation numbers are written in the form:A,Ba x 10nWhere:a is a number between 1 and 10n is a positive or negative whole number.In engineering notation, the n value is commonly in the form of multiples of 3. In this way the number will always explicitly match the corresponding SI prefixes.BFor example a distance of 50,000 m would be written as:Scientific Notation: 5 x 104 mEngineering notation: 50 x 103 mIn this example 103 corresponds to the SI prefix "kilo"C as such the engineering notation could be directly described verbally as "fifty kilometres" whereas scientific notation yields the much more unwieldy "five times ten to the power four metres" which is much less intuitively easy to understand, even though it is exactly the same distance.Guidance on converting to and from scientific notation is given in the related links. Specifically References A and B.References:A Scientific notation - Engineering Maths Help from the 'mathcentre' Academic Website.B Scientific notation: Wikipedia Entry.C List of SI prefixes: Wikipedia Entry.Please see related links.
What is The Basic Rules for engineering?
Engineering is done with numbers.
What is the meaning of engineering Explain with suitable examples?
Engineering is the application of rules of engineering to any field e-g application of rules of engineering to computer-science makes it computer-engineering similar to all fields (electrical, civil, petroleaum,software)
Can you transfer credit hours from the University of phoenix to the University of Alabama?
You will have to talk to the people at the University of Alabama. They will have the specific rules for transfer of credits.
What is the position of presidency university in engineering in Bangladesh?
Actually Presiency University Ranking is not counted on Top Ten. Among private universities other than top ten its position is in mid label. It has no campus of its own according the UGC(University Grand Commission) Rules. Students education quality is not rising up yet. Its going on its business in several area of Dhaka City by rented buildings. There are not sufficient Number of PHD holder Teachers in Presiency University.
What Is All laboratory Safety Rules?
There is no universal set of safety rules for all laboratories. The rules will be different depending on the kind of lab and the level of training of the people working in it. For example, rules for an engineering lab in industry will be very different form rules for a teaching chemistry lab in a high school
What early rules were developed for this at McGill University in 1870s?
ice hockey
Who taught that the university followed the same rules as music and numbers?
pythogora
What has the author Dan MacLeod written?
Dan MacLeod has written: 'The Office Ergonomics Tool Kit With Training Disc' 'The ergonomics kit for general industry' -- subject(s): Human engineering, OverDrive, Engineering, Nonfiction, Technology 'The rules of work' -- subject(s): Human engineering, OverDrive, Engineering, Nonfiction, Technology 'The Ergonomics Edge' -- subject(s): Industrial management, Human engineering
Does the University of Oklahoma have rules against convicted felons attending or graduating?
As a publicly funded state institution the University is not legally allowed to discriminate.
What is MHRA and its rules and regulations.?
The MHRA is the Modern Humanities Research Association. Its rules and regulations allow all university graduates who study the humanities to join.
What are the dorm rules of central Michigan university?
Every residence hall creates many of their own "rules" which are enforced by the hall director and resident assistants.
Why do you need a license for engineering?
You need a license for engineering so you actually know what your doing. That way, you can't say "but I didn't know" when fixing someones car or something. Plus ,it will be easier to sue you if you don't play by the rules.
